About
Vibration isolation mounts with a threaded stud on both ends. Inch threads ranging from #8-32 TPI to 1/2 in-13 TPI and metric threads from M3 to M16. Components are manufactured from zinc-plated steel or stainless steel and surrounded by a natural rubber jacket. All vibration damping mounts from Ruland are RoHS3 and REACH compliant.
Vibration isolation mounts with a threaded tapped hole on both ends. Inch threads ranging from #8-32 TPI to 3/8 in-16 TPI and metric threads from M3 to M16. Components are manufactured from zinc-plated steel or stainless steel and surrounded by a natural rubber jacket. All vibration damping mounts from Ruland are RoHS3 and REACH compliant.
Vibration isolation mounts with a threaded stud on one end and a tapped hole on the other. Inch threads ranging from #8-32 TPI to 1/2 in-13 TPI and metric threads from M3 to M16. Components are manufactured from zinc-plated steel or stainless steel and surrounded by a natural rubber jacket. All vibration damping mounts from Ruland are RoHS3 and REACH compliant.
Why Ruland?
- Design with a standard off-the-shelf product from our 1100+ options.
- Intended for use in any operating environment with rubber offered in natural rubber, silicone, and nitrile.
- Metallic cores in high-strength steel and corrosion resistant stainless steel.
- Easily change the performance in the same body size due to three shore hardness options.
- Consistent performance with shore hardness tolerance of +/- 5.
Products
-
As low as $17.90 $23.80Ruland VMDTC20-15-M6-40-FZNR/10PK, 10 Pack Of Vibration Isolation Mounts, 20mm OD, M6 Tapped Holes, 6mm Tapped Hole Depths, 15mm Height, 40 Shore A Natural Rubber Jacket, Steel
Part number | Bore (B1) | Small Bore (B2) | Length (L) | Material | Outer Diameter (OD) | Maximum Speed |
---|---|---|---|---|---|---|
VMDTC20-15-M6-40-FZNR/10PK |