The store will not work correctly in the case when cookies are disabled.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Ruland manufactures face mount shaft collars with precise face to bore perpendicularity (TIR ≤ .002" or 0.05mm), which is critical when they are being mounted directly to another component. They are available in bore sizes ranging from 3/8” to 3” (10mm to 80mm).
This Ruland bundle combines a one or two-piece shaft collar with a clamping lever to make a quick release shaft collar. Bore sizes range from 3/8” to 1 ½” and 11mm to 40mm. Collars are available in anodized aluminum, plain aluminum, 303 stainless steel, 316 stainless steel, steel, plastic, and zinc..
This Ruland bundle combines a one or two-piece shaft collar with a clamping lever to make a quick release shaft collar. The threaded stud on the adjustable clamping lever is used in place of standard collar hardware. When combined, the two parts create a shaft collar with a ratcheting handle that requires no tools to install, remove, or reposition and is ideally suited for packaging, printing, and other applications where frequent setup changes and adjustments are needed. Once the lever is installed in the shaft collar, users simply turn the lever until they meet their desired torque. Bore sizes range from 3/8” to 1 ½” and 11mm to 40mm. Collars are available in anodized aluminum, plain aluminum, 303 stainless steel, 316 stainless steel, steel, plastic, and zinc. The clamping lever is comprised of a black or orange die-cast zinc handle and a 303 stainless steel threaded stud.
This Ruland bundle combines a one-piece shaft collar with a clamping lever to make a quick release shaft collar. One-piece shaft collars wrap around the shaft for even distribution of clamping forces. This results in a tight fit and greater holding power, without the shaft damage caused by set screws. Clamp collars are easy to remove, indefinitely adjustable, and work well on virtually any shaft. The threaded stud on the adjustable clamping lever is used in place of standard collar hardware. When combined, the two parts create a shaft collar with a ratcheting handle that requires no tools to install, remove, or reposition. Once the lever is installed in the shaft collar, users simply turn the lever until they meet their desired torque. Bore sizes range from 3/8” to 1 ½” and 11mm to 40mm.
This Ruland bundle combines a two-piece shaft collar with a clamping lever to make a quick release shaft collar. Two-piece shaft collars offer the same benefits as the one-piece style with additional versatility and convenience. The split design is easily installed and disassembled, reducing labor and downtime when adjustment, removal, or replacement is necessary. The threaded stud on the adjustable clamping lever is used in place of standard collar hardware. When combined, the two parts create a shaft collar with a ratcheting handle that requires no tools to install, remove, or reposition. Once the lever is installed in the shaft collar, users simply turn the lever until they meet their desired torque. Bore sizes range from 3/8” to 1 ½” and 11mm to 40mm.
This Ruland bundle combines a one-piece mountable shaft collar with an adjustable handle, making a quick clamping mountable shaft collar. Mountable shaft collars are designed with flats and holes in the outer diameter or holes only to allow for easy mounting of shaft collars to each other or adjacent assemblies. The one-piece style does not mar the shaft, has the highest holding power, and is indefinitely adjustable. Ruland manufactures mountable shaft collars in 1215 lead-free steel with a black oxide finish, 303 stainless steel, and high-strength 2024 aluminum. The adjustable handle is made of a zinc die-cast handle with a powder coated finish and a stainless steel stud. Bore sizes range from 1/2" to 1 1/2" and 12mm to 40mm.
This Ruland bundle combines a two-piece mountable shaft collar with an adjustable handle, making a quick clamping mountable shaft collar. Mountable shaft collars are designed with flats and holes in the outer diameter or holes only to allow for easy mounting of shaft collars to each other or adjacent assemblies. The two-piece style does not mar the shaft and is indefinitely adjustable. Ruland manufactures mountable shaft collars in 1215 lead-free steel with a black oxide finish, 303 stainless steel, and high-strength 2024 aluminum. The adjustable handle is made of a zinc die-cast handle with a powder coated finish and a stainless steel stud. Bore sizes range from 1/2" to 1 1/2" and 12mm to 40mm.
