Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team

MQCL-60-A

$113.03
Quantity Price (USD)
1 $113.03
10 $102.75
25 $85.63
50 $77.06
100 Request Quote
In stock
Registered users receive a 5% discount
Only 5 left
Ruland MQCL-60-A, 60mm Quick Clamping Shaft Collar, Aluminum, Quick Release, 120mm OD, 19mm Width

Explore Similar Products

PRODUCT SPECIFICATIONS

Ruland MQCL-60-A is a quick clamping shaft collar with cam lever with a 60mm bore, 120mm OD, and 19mm width. The patented design requires no tools to install or remove allowing for quick installations and adjustments while reducing downtime. It is designed for light duty stationary or low rotating applications where frequent change outs of items including media, guide rails, or other setup fixturing is required. MQCL-60-A has an cam lever that can be actuated using finger power only for easy postioning adjustments. The screw can be adjusted to be compatible with wider shaft tolerances and provide a range of axial holding power. Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. MQCL-60-A is stamped with the Ruland name and bore size for ease of identification. It is manufactured from solid bar stock sourced from select North American mills and machined to a fine burr free finish. MQCL-60-A is RoHS3 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

PRODUCT SPECIFICATIONS

Dimensions

Bore (B1) Larger inner diameter. Should match nominal shaft diameter.

60 mm

Bore Tolerance Variance in finished bore range before installation.

+0.050 mm / +0.012 mm

Width (W)

19 mm

Outer Diameter (OD)

120 mm

Width Tolerance

+0.076 mm / -0.254 mm

Recommended Shaft Tolerance Acceptable variance in nominal shaft diameter before performance loss.

+0.000 mm / -0.013 mm

Fastening Hardware

Cap Screw Inch or metric socket head cap screw size.

M6

Screw Material

18-8 300 Series Stainless Steel

Hex Wrench Size Wrench size that fits the screw head to tighten or loosen the screw.

5.0 mm

Screw Finish Surface finish and treatments on supplied hardware.

Bright

Seating Torque Torque required to install supplied hardware. Use torque wrench for accurate seating torque.

Factory Preset: 3.96 Nm, Min: 3.39 Nm , Max: 4.52 Nm

Number of Screws

1 ea

Peformance Specifications

Axial Load

Min: 890 N, Max: 1379 N

Additional Information

Material Specification

Body: 6061-T651 Aluminum Bar, Handle: 6063-T651 Aluminum

Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...

-40°F to 200°F (-40°C to 93°C)

Finish Specification Surface finish specifications.

Body: Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize, Handle: Sulfuric Anodized MIL-A-8625 Type II, Class 2 Gold Anodize with Teflon

Manufacturer

Ruland Manufacturing

Country of Origin

USA

Weight (lbs)

0.900600

UPC

634529135679

Tariff Code

8483.60.8000

UNSPC Code used to identify products to standardize nomenclature around the world.

31162811

Product Notes

Note 1

Increasing or decreasing screw seating torque increases or decreases the axial load. Increasing torque will make it more difficult to open the handle.

Note 2

The minimum and maximum axial load data are typical values under certain test conditions and are not a guarantee of average values nor a guarantee of maximum or minimum values under all conditions. Thrust values shown are FAILURE MODE. They are shown solely for the reader to utilize appropriate testing equipment to make his/her own evaluation, and are not intended by Ruland Manufacturing Company, Inc., as warranties, either express or implied, of fitness for a given purpose.

Note 3

U.S. Patent No. USD629016S1

Prop 65 Required for the US State of California only.

WARNING This product can expose you to the chemical Nickel (metallic), known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

CERTIFICATIONS/STANDARDS
ISO 9001:2015

Certified

Conflict Minerals

Compliant

RoHS3

Compliant

REACH

Compliant

Installation Instructions

  1. The MQCL-60-A quick clamping shaft collar is shipped from the factory with a pre-set screw seating torque that allows it to be used out of the box with no additional tools needed for installation.
  2. Use collars as they are received.
  3. Wipe the bore clean.
  4. Apply a thin coat of light oil to the shaft.
  5. Place the collar onto the desired shaft location with the groove side as the work surface and close the cam lever by hand. Resistance should be felt on the cam as it closes.
  6. Should your specific application call for fine adjustments please follow the steps to properly seat the screw.
    1. Open the cam lever and place the collar on the shaft at the desired location.
    2. Turn the M6 tensioning screw clockwise by a fractional amount (less than 1/8-turn) using a torque wrench with a 5.0 mm bit.
    3. Close the cam lever completely observing increased resistance as it is closed.
    4. Repeat tensioning screw adjustment until desired performance is achieved.
    5. CAUTION - Do not over-tighten the cap screw as the cam may lock in the closed position or damage to the cam mechanism may occur.
  7. In the event the cam lever encounters excessive resistance due to the shaft being oversized, follow the noted re-adjustment steps turning the tensioning screw counter-clockwise in this case.

CUSTOMER REVIEWS

MQCL-60-A
© 2024 Ruland Manufacturing Co., Inc. All rights reserved