The store will not work correctly in the case when cookies are disabled.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Clamp style universal joints improve over set screw style because they do not mar the shaft, offer infinite adjustability, and can be used on all shaft types. Ruland is the only North American supplier of clamp style universal joints and manufactures the clamp feature, bores, and keyways in our advanced manufacturing facility in Marlborough, MA USA. They are available in sizes from 1/4" to 1 1/4” in steel for high strength and stainless steel for corrosion resistance.
Ruland LVO-MSP-15E-SS is a two-piece quick clamping shaft collar with clamping lever with a 0.9375" bore, 45mm OD, and 15mm width. It is made from MSP-15E-SS and LF45-CL-M6:18-ZS. MSP-15E-SS is an international series shaft collar that has an inch bore, metric hardware, and metric dimensions. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. The threaded stud on the lever is used in place of standard collar hardware. Two-piece shafts collars can be assembled in-lace without the need to remove other components. Ruland mates halves throughout the manufacturing process for proper fit, alignment, and holding power. When combined, the two parts create a shaft collar that requires no tools to install, remove, or reposition and is ideally suited for packaging, printing, and other applications where frequent setup changes and adjustments are needed. Once the lever is installed in the shaft collar, users simply turn the lever until they meet their desired torque. The adjustable lever can be reposition by the user without the loss of holding power by lifting the handle and twisting it 40° to lock it in a new position. This allows for use in space constrained environments where 360° rotation is not possible to fully seat the lever. MSP-15E-SS is made from 303 stainless steel. LF45-CL-M6:18-ZS has a zinc plated steel handle and stainless steel threaded stud. This material combination allows for a durable quick clamping and release component with high corrosion resistance that is suitable for most industrial applications. The lever is orange for safety and ease of identification. MSP-15E-SS is manufactured by Ruland and LF45-CL-M6:18-ZS is manufactured by Otto Ganter. LVO-MSP-15E-SS is RoHS3 and REACH compliant.
PRODUCT SPECIFICATIONS
Dimension
Bore (B1)
Larger inner diameter. Should match nominal shaft diameter.
0.9375 in
Bore Tolerance
Variance in finished bore range before installation.
+0.0020 in / +0.0005 in
Outer Diameter (OD)
45 mm
Center to Lever Top H1
38.8 mm
Width (W)
15 mm
Width Tolerance
+0.076 mm / -0.254 mm
Lever Length L1
45 mm
Lever Height H2
38.5 mm
Hub Diameter DH
13 mm
Sleeve Length L2
18 mm
Recommended Gap
The recommended gap between halves to maintain during installation. See installation instructions for more information.
1.59 mm
Recommended Shaft Tolerance
Acceptable variance in nominal shaft diameter before performance loss.
+0.0000 in / -0.0005 in
Fastening Hardware
Thread TH
M6
Hex Wrench Size
Wrench size that fits the screw head to tighten or loosen the screw.
5.0 mm
Seating Torque
Torque required to install supplied hardware. Use torque wrench for accurate seating torque.