Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team


Quantity Price (USD)
1 $24.46
100 $22.50
250 $20.38
500 $18.35
1000 Request Quote
In stock
Registered users receive a 5% discount
Only 5 left
Ruland Indexing Plunger, Thread M16x1.5, Pin Diameter 10mm, Knob Diameter 28mm, L 58mm, Steel

Explore Similar Products


Ruland IPNN-10-12-M16X1.5-F is a steel indexing plunger. It has a 10mm pin diameter, 12mm pin length, M16x1.5 thread, 26mm tapped thread length, 28mm knob diameter, and 58mm overall length. This indexing plunger is commonly used for height adjustments, rotational or swivel limits, and as a quick way to detach a movable component from a stationary one. The threaded body allows it to be installed directly onto a machine or component. To operate, the user simply retracts the knob pulling the pin into the body of the plunger allowing a previously fixed component to be moved. Once the component is in the desired position, the user reinserts the pin into a mating hole in the stationary component. The knob of IPNN-10-12-M16X1.5-F partially encloses the top of the plunger body, allowing less debris to enter the mechanism, which is critical when used in environments that commonly have metal chips and other contaminants. It is manufactured by Otto Ganter, stocked by Ruland, and RoHS3 compliant.



Overall Length L1

58 mm

Body Length L2

26 mm

Thread (TH)


Knob Height H1

24 mm

Knob Diameter D1

28 mm

Pin Diameter D2

10 mm

Pin Length L3

12 mm

Nut Height HN1

8 mm

Hex Nut Size

17 mm

Additional Information

Initial Spring Load The axial load output by the spring when not in use.

9.5 N

End Spring Load The axial load output by the spring when in use.

38 N

Plunger Pin Tolerance The manufacturing tolerance of the end pin.

-0.02/-0.05 mm

Hole Tolerance

+0.015/-0 mm

Weight (lbs)


Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...

-40°F to 230°F (-40°C to 110°C)


JW Winco/ Otto Ganter



Country of Origin


Tariff Code


UNSPC Code used to identify products to standardize nomenclature around the world.


Product Notes

Note 1

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Prop 65 Required for the US State of California only.

WARNING This product can expose you to chemicals including Soots and Nickel (metallic), known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

ISO 9001:2015


Conflict Minerals





© 2024 Ruland Manufacturing Co., Inc. All rights reserved