Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team


Quantity Price (USD)
1 $36.96
50 $33.60
100 $25.09
250 $15.06
500 Request Quote
In Production Lead Time: 1 Week or Less
Ruland FHT-MCL-10-SS, 10mm Face Mount Shaft Collar with Tapped Hole, 303 Stainless Steel, One-Piece Clamp Style, 24mm OD, 9mm Width

Explore Similar Products


Ruland FHT-MCL-10-SS is a one-piece shaft collar with a 10mm bore, 24mm OD, and 9mm width. FHT-MCL-10-SS has tapped holes for mounting shaft collars to sprockets, pulleys, metallic plates, or other components. Tapped holes allow for a secure connection between the shaft collar and mated component. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. FHT-MCL-10-SS is stamped with the Ruland name and bore size for ease of identification. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. FHT-MCL-10-SS is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 303 stainless steel with hardware of like material for consistent corrosion resistance. It is RoHS3 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.



Bore (B1) Larger inner diameter. Should match nominal shaft diameter.

10 mm

Bore Tolerance Variance in finished bore range before installation.

+0.050 mm / +0.012 mm

Outer Diameter (OD)

24 mm

Clearance Diameter (C) MAX Minimum diameter required to avoid interference with hardware.

26.3 mm

Width (W)

9 mm

Width Tolerance

+0.076 mm / -0.254 mm

Hole to Center (HC)

8.50 mm

Hole to Hole (HH)

17.00 mm

Threaded Mounting Hole


Recommended Shaft Tolerance Acceptable variance in nominal shaft diameter before performance loss.

+0.000 mm / -0.013 mm

Fastening Hardware

Forged Clamp Screw Inch or metric socket head cap screw size.

M3 x 10

Screw Material

18-8 300 Series Stainless Steel

Hex Wrench Size Wrench size that fits the screw head to tighten or loosen the screw.

2.5 mm

Screw Finish Surface finish and treatments on supplied hardware.


Seating Torque Torque required to install supplied hardware. Use torque wrench for accurate seating torque.

1.1 Nm

Screw Location (R)

8.51 mm

Number of Screws

1 ea

Recommended Installation Tools

Torque Wrench This torque wrench and bit combo is recommended to ensure proper installation. A torque wrench prevents the screw from being over torqued which can lead to product failure.


Recommended Hex Key This hex key set has the appropriate hex key for product installation. Trained and experienced assemblers can use a hex key in place of a torque wrench.

Metric Hex Keys

Additional Information

Material Specification

Type 303 Austenitic, Non-Magnetic Bar

Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...

-40°F to 350°F (-40°C to 176°C)

Finish Specification Surface finish specifications.

Bright, No Plating


Ruland Manufacturing

Country of Origin


Weight (lbs)




Tariff Code


UNSPC Code used to identify products to standardize nomenclature around the world.


Product Notes

Note 1

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Prop 65 Required for the US State of California only.

WARNING This product can expose you to the chemical Nickel (metallic), known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

ISO 9001:2015


Conflict Minerals







© 2024 Ruland Manufacturing Co., Inc. All rights reserved