Free 2 Day Domestic
Free 2 day shipping for all domestic orders. Free Expedited shipping for all international orders over $399.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Dimension | |||
---|---|---|---|
Bore (B1) Larger inner diameter. Should match nominal shaft diameter. |
38 mm |
Bore Tolerance Variance in finished bore range before installation. |
+0.050 mm / +0.012 mm |
Outer Diameter (OD) |
60 mm |
Clearance Diameter (C) MAX Minimum diameter required to avoid interference with hardware. |
65.6 mm |
Width (W) |
15 mm |
Width Tolerance |
+0.076 mm / -0.254 mm |
Hole to Center (HC) |
24.50 mm |
Hole to Hole (HH) |
49.00 mm |
Hole Diameter (H) |
6.35 mm |
Recommended Shaft Tolerance Acceptable variance in nominal shaft diameter before performance loss. |
+0.000 mm / -0.013 mm |
Fastening Hardware | |||
Forged Clamp Screw Inch or metric socket head cap screw size. |
M6 x 18 |
Screw Material |
Alloy Steel |
Hex Wrench Size Wrench size that fits the screw head to tighten or loosen the screw. |
5.0 mm |
Screw Finish Surface finish and treatments on supplied hardware. |
Black Oxide |
Seating Torque Torque required to install supplied hardware. Use torque wrench for accurate seating torque. |
16 Nm |
Screw Location (R) |
24.99 mm |
Number of Screws |
1 ea |
||
Recommended Installation Tools | |||
Torque Wrench This torque wrench and bit combo is recommended to ensure proper installation. A torque wrench prevents the screw from being over torqued which can lead to product failure. |
Recommended Hex Key This hex key set has the appropriate hex key for product installation. Trained and experienced assemblers can use a hex key in place of a torque wrench. |
||
Additional Information | |||
Material Specification |
1215 Carbon Steel Bar |
Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc... |
-40°F to 350°F (-40°C to 176°C) |
Hot Process Black Oxide, Impregnated with Naphthenic Oil, Centrifugally Dried |
Manufacturer |
Ruland Manufacturing |
|
Country of Origin |
USA |
Weight (lbs) |
0.400473 |
UPC |
63452937720 |
Tariff Code |
8483.60.8000 |
UNSPC Code used to identify products to standardize nomenclature around the world. |
31162811 |
||
Product Notes | |||
Note 1 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
|