The store will not work correctly when cookies are disabled.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Large jaw couplings are now being offered for bore sizes up to 1-3/4” or 45 mm and torque capacities of 2,655 in-lbs (300 Nm). These new large jaw couplings are designed for use in precision systems with high deceleration and acceleration curves, such as those found in semiconductor, solar, conveyor, and warehouse automation applications.
Pre-assembled modular mounting systems are designed for adjustability across many mounting applications. Conveyor mounting systems emphasize strict parallel installation using a flange-bolt base and a conveyor rail guide. Sensor mounting systems offer flexibility in a mounting application with adjustable or 90-degree connectors, two-way bases, and various mounting brackets. Both systems include stainless steel rods (with or without scale) from 100mm to 300mm in length, zinc clamping levers, and connectors that allow adjustment of the rods’ position.
Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Ruland ENCL60-30MM-SS is a one-piece thin line shaft collar with a 30mm bore, 60mm OD, and 12mm width. The narrow profile reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. ENCL60-30MM-SS is stamped with the Ruland name for ease of identification. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. ENCL60-30MM-SS is manufactured from solid bar stock sourced from select North American mills and machined to a fine burr free finish. Ruland uses 303 stainless steel with hardware of like material for consistent corrosion resistance. Stainless steel hardware undergoes a proprietary surface treatment process to prevent galling. ENCL60-30MM-SS is RoHS3 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
Dimension
Bore (B1) Larger inner diameter. Should match nominal shaft diameter.
30 mm
Bore Tolerance Variance in finished bore range before installation.
+0.050 mm / +0.012 mm
Outer Diameter (OD)
60 mm
Clearance Diameter (C) MAX Minimum diameter required to avoid interference with hardware.
63.75 mm
Width (W)
12 mm
Width Tolerance
+0.076 mm / -0.254 mm
Recommended Shaft Tolerance Acceptable variance in nominal shaft diameter before performance loss.
+0.000 mm / -0.013 mm
Fastening Hardware
Forged Clamp Screw Inch or metric socket head cap screw size.
M5 x 14
Screw Material
18-8 300 Series Stainless Steel
Hex Wrench Size Wrench size that fits the screw head to tighten or loosen the screw.
4.0 mm
Screw Finish Surface finish and treatments on supplied hardware.
Bright
Seating Torque Torque required to install supplied hardware. Use torque wrench for accurate seating torque.
Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...
-40°F to 350°F (-40°C to 176°C)
Weight (lbs)
0.427300
UPC
634529138748
Tariff Code
8483.60.8000
UNSPC Code used to identify products to standardize nomenclature around the world.
31162811
Product Notes
Note 1
Performance ratings are for guidance only. The user must determine suitability for a particular application.
Prop 65 Required for the US State of California only.
WARNING This product can expose you to the chemical Nickel (metallic), known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.