Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team


Quantity Price (USD)
1 $287.83
5 $261.66
25 $218.05
50 $196.25
100 Request Quote
In stock
Registered users receive a 5% discount
Only 3 left
Ruland CLX-19-16-SS, 1-3/16" x 1" Rigid Coupling, 303 Stainless Steel, One-Piece Clamp Style, 2 1/16" OD, 3 1/4" Length

Explore Similar Products


Ruland CLX-19-16-SS is a one-piece rigid coupling with 1.1875" x 1.0000" bores, 2 1/16" OD, and 3 1/4" length. Proprietary Nypatch® anti-vibration coating on hardware allows for even seating of the screw, repeated screw installations, prevents galling, and maintains high holding power. It eliminates the need to treat screws upon receipt greatly reducing installation time. Forged screws test beyond ANSI standards to ensure maximum holding power. Tightly controlled bore tolerance of +.002"/+.0005" is maintained. CLX-19-16-SS is made from 303 stainless steel with hardware of like material for consistent corrosion resistance. It is machined from solid bar stock that is sourced exclusively from North American mills and is RoHS3 and REACH compliant. CLX-19-16-SS is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.



Bore (B1) Larger inner diameter. Should match nominal shaft diameter.

1.1875 in

Small Bore (B2) Smaller inner diameter. Should match nominal shaft diameter.

1.0000 in

B1 Max Shaft Penetration The maximum depth the shaft can penetrate into Bore B1.

1.625 in

B2 Max Shaft Penetration The maximum depth the shaft can penetrate into Bore B2.

1.625 in

Outer Diameter (OD)

2 1/16 in

Bore Tolerance Variance in finished bore range before installation.

+0.0020 in / +0.0005 in

Length (L)

3 1/4 in

Clearance Diameter (C) MAX Minimum diameter required to avoid interference with hardware.

2.242 in

Recommended Shaft Tolerance Acceptable variance in nominal shaft diameter before performance loss.

+0.0000 in / -0.0005 in

Fastening Hardware

Forged Clamp Screw Inch or metric socket head cap screw size.


Screw Material

18-8 300 Series Stainless Steel with Nypatch®

Hex Wrench Size Wrench size that fits the screw head to tighten or loosen the screw.

3/16 in

Screw Finish Surface finish and treatments on supplied hardware.


Seating Torque Torque required to install supplied hardware. Use torque wrench for accurate seating torque.

110 lb-in

Screw Location (R)

0.807 in

Number of Screws

4 ea

Performance Specifications

Rated Torque Recommended torque based on slippage on the shaft.

Rating Coming Soon

Moment of Inertia

1.4597 lb-in2

Maximum Speed

4,000 RPM

Full Bearing Support Required? Full bearing support is a bearing in close proximity to both sides of the coupling to prevent axial loads that could result in rapid coupling failure.


Nypatch® Anti-Vibration Hardware? This proprietary coating allows for repeated installations, prevents screws from coming loose during operation, and provides the necessary dissimilar material in stainless steel couplings to reduce galling.


Zero-Backlash? Zero-backlash ensures there is no loss of motion during operation.


Additional Information

Material Specification

Type 303 Austenitic, Non-Magnetic Bar

Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...

-40°F to 350°F (-40°C to 176°C)

Finish Specification Surface finish specifications.

Bright, No Plating


Ruland Manufacturing

Country of Origin


Weight (lbs)




Tariff Code


UNSPC Code used to identify products to standardize nomenclature around the world.


Product Notes

Note 1

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Prop 65 Required for the US State of California only.

WARNING This product can expose you to the chemical Nickel (metallic), known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

ISO 9001:2015


Conflict Minerals






Installation Instructions

  1. Align the CLX-19-16-SS one-piece rigid coupling on the two shafts to be connected. There should be no misalignment.
  2. Tighten the Nypatch® screws in two stages, starting with the inside screws. Using a 3/16 in torque wrench, tighten the inside screws to 55 lb-in which is half the recommended seating torque. Repeat for the outside screws, again tightening to half of the recommended seating torque.
  3. Tighten the screws to the full recommended seating torque of 110 lb-in following the same pattern, starting with the inside screws first.


© 2024 Ruland Manufacturing Co., Inc. All rights reserved