CL-6HX-F
Ruland CL-6HX-F, 3/8" Hex Bore Shaft Collar, Black Oxide Steel, One-Piece Clamp Style, 7/8" OD, 0.343" Width
Ruland CL-6HX-F, 3/8" Hex Bore Shaft Collar, Black Oxide Steel, One-Piece Clamp Style, 7/8" OD, 0.343" Width
Ruland CL-6HX-F is a one-piece shaft collar with a 3/8" bore, 7/8" OD, and 0.343" width. It has a hex bore which is useful when the collar is used in a positive drive application. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. CL-6HX-F is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002"). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. CL-6HX-F is stamped with the Ruland name and bore size for ease of identification. Forged screws test beyond ANSI standards to ensure maximum holding power. CL-6HX-F is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 1215 lead-free steel with a proprietary black oxide finish that produces a fine glossy finish while increasing holding power and resisting corrosion. It is RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
Dimension | |||
---|---|---|---|
Bore B |
0.3750 in |
Bore Tolerance |
+.002 in / +.0005 in |
Outer Diameter OD |
7/8 in |
Clearance Diameter C MAX |
1.027 in |
Width W |
0.343 in |
Width Tolerance |
+.003 in / -.010 in |
Fastening Hardware | |||
Forged Clamp Screw |
#6-32 |
Screw Material |
Alloy Steel |
Hex Wrench Size |
7/64 in |
Screw Finish |
Black Oxide |
Seating Torque |
28 lb-in |
Screw Location R |
0.313 in |
Number of Screws |
1 ea |
||
Additional Information | |||
Material Specification |
1215 Carbon Steel Bar |
Finish Specification |
Hot Process Black Oxide, Impregnated with Naphthenic Oil, Centrifugally Dried |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Temperature |
-40°F to 350°F |
Weight (lbs.) |
0.0400 |
UPC |
63452900142 |
||
Product Notes | |||
Note 1 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Prop 65 |
|