The store will not work correctly in the case when cookies are disabled.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Clamp style universal joints improve over set screw style because they do not mar the shaft, offer infinite adjustability, and can be used on all shaft types. Ruland is the only North American supplier of clamp style universal joints and manufactures the clamp feature, bores, and keyways in our advanced manufacturing facility in Marlborough, MA USA. They are available in sizes from 1/4" to 1 1/4” in steel for high strength and stainless steel for corrosion resistance.
Ruland oldham couplings are a three-piece assembly with a balanced, high RPM design comprised of two anodized aluminum or stainless steel hubs and a center disk. Designers can choose between acetal, Nylon, and PEEK center disks to balance torsional rigidity, torque, and environmental compliance. Ruland uses a proprietary machining process to ensure smooth interaction between the oldham coupling hub tenons and disk allowing for the longest service life in the industry. Oldham couplings accommodate significantly more parallel misalignment (up to 10% of the outer diameter) than any other Ruland servo coupling. Due to their three-piece design oldham couplings be easily assembled and taken apart. This makes them ideal in printing applications with rollers that are frequently changed and replaced. Operators need only remove the center disk before separating shafts, saving significant time when compared to one-piece couplings that require tools to remove and install. If coupling failure occurs the center disk will act as a torque limiter by breaking cleanly and ceasing power transmission, potentially protecting expensive machine components. In this event operators can quickly and easily replace the relatively inexpensive disk to quickly return to normal operation. Bore sizes are available from 1/8” to 1-1/8” and 3mm to 30mm. Oldham coupling hubs are available in clamp and set screw styles with or without keyways, allowing designers to mix and match hubs to fit different shaft types. All oldham couplings have a balanced, zero-backlash design for reduced vibration and precision operation.