SC-8-SS
$7.55
ea
Ruland SC-8-SS, 1/2" Set Screw Shaft Collar, 303 Stainless Steel, 1" OD, 0.438" Width
PRODUCT SPECIFICATIONS
Ruland SC-8-SS is a set screw shaft collar with 1/2" bore, 1" OD, and 0.438" width. It is commonly used for guiding, spacing, stopping, and component alignment in light duty applications where the collar is infrequently repositioned or removed. Holding power is derived from the screw as it is tightened onto the shaft. In order for the collar to obtain maximum holding power the shaft must be softer than the material of the screw. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. SC-8-SS is stamped with the Ruland name and bore size for ease of identification. Forged screw test beyond ANSI standards to ensure maximum holding power. SC-8-SS is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 303 stainless steel with hardware of like material for consistent corrosion resistance. It is RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
| Dimensions | |||
|---|---|---|---|
Bore B |
0.5000 in |
Width W |
0.438 in |
Outer Diameter OD |
1 in |
Width Tolerance |
+.003 in / -.010 in |
Bore Tolerance |
+.0005 in to +.002 in |
||
| Fastening Hardware | |||
Forged Set Screw |
1/4-20x1/4 |
Screw Material |
18-8 300 Series Stainless Steel |
Hex Wrench Size |
1/8 in |
Screw Finish |
Bright |
Seating Torque |
70 lb-in |
Number of Screws |
1 ea |
| Additional Information | |||
Material Specification |
Type 303 Austenitic, Non-Magnetic Bar |
Temperature |
-40°F to 350°F |
Finish Specification |
Bright |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Weight (lbs.) |
0.0320 |
UPC |
63452901986 |
||
