MCLC-8-8-F
$62.91
ea
Ruland MCLC-8-8-F, 8mm x 8mm Rigid Coupling, Black Oxide Steel, One-Piece Clamp Style with Keyway, 24mm OD, 35mm Length
PRODUCT SPECIFICATIONS
Ruland MCLC-8-8-F is a one-piece rigid coupling with 8mm x 8mm bores, 2mm x 2mm keyways, 24mm OD, and 35mm length. It has precision honed bores on to ensure bores are collinear and does not introduce misalignment or vibration into the system making it suitable for high precision servo appliactions as well as shaft to shaft connections. Proprietary Nypatch® anti-vibration coating on hardware allows for even seating of the screw, repeated screw installations, prevents galling, and maintains high holding power. It eliminates the need to treat screws upon receipt greatly reducing installation time. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. Tightly controlled bore tolerance of +.050mm/+.012mm is maintained. MCLC-8-8-F is made from 1215 lead-free steel with a proprietary black oxide finish that produces a fine glossy finish while increasing holding power and resisting corrosion. It is machined from solid bar stock that is sourced exclusively from North American mills and is RoHS2 and REACH compliant. MCLC-8-8-F is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
| Dimensions | |||
|---|---|---|---|
Large Bore B1 |
8 mm |
Small Bore B2 |
8 mm |
Keyway K1 |
2 mm |
Keyway K2 |
2 mm |
B1 Shaft Penetration |
17.5 mm |
B2 Shaft Penetration |
17.5 mm |
Outer Diameter OD |
24 mm |
Bore Tolerance |
+.050 mm / +.012 mm |
Length L |
35 mm |
Clearance Diameter C MAX |
27.1 mm |
| Fastening Hardware | |||
Forged Clamp Screw |
M3 |
Screw Material |
Alloy Steel with Nypatch® |
Hex Wrench Size |
2.5 mm |
Screw Finish |
Black Oxide |
Seating Torque |
2.1 Nm |
Screw Location R |
9.0 mm |
Number of Screws |
4 ea |
||
| Performance Specifications | |||
Rated Torque |
50 Nm |
Maximum Speed |
4,000 RPM |
| Additional Information | |||
Material Specification |
1215 Carbon Steel Bar |
Temperature |
-40°F to 350°F |
Finish Specification |
Hot Process Black Oxide, Impregnated with Naphthenic Oil, Centrifugally Dried |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Weight (lbs.) |
0.2400 |
UPC |
63452901338 |
||
| Product Notes | |||
Note 1 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Prop 65 |
|
WARNING This product can expose you to the chemical Ethylene Thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to 
