Mechanical Stops from Ruland
Shaft collars from Ruland are commonly used as mechanical stops on cylinders and actuators where precise control of motion is critical. They have tightly controlled face to bore perpendicularity for increased performance in impact applications. Fastening hardware tests above industry standards for maximum torque capabilities and holding power.
One- and two-piece style shaft collars from Ruland are well suited for mechanical stop applications as they distribute compressive forces evenly around the shaft for a tight fit and improved holding power. Ruland clamp style shaft collars have tightly controlled face to bore perpendicularity (TIR of ≤ .002" / .05mm) which is critical when the collar is used as a load-bearing face to ensure even distribution of forces in impact situations. High TIR causes uneven loading and can result in the collar incrementally slipping on the shaft leading to loss of positioning. Clamp shaft collars do not mar the shaft, allow for easy positioning adjustments, and are simple to install and remove. Two-piece styles offer increased holding power and are mated throughout the manufacturing process for proper fit and alignment. Since the two pieces come apart completely they can also be installed on an undercut shaft for critical or high axial load conditions.
Shaft collars from Ruland have carefully selected fastening hardware that tests beyond industry standards for maximum torque capabilities. Steel shaft collars undergo Ruland's proprietary black oxide process providing corrosion protection and ensuring a smooth screw installation to increase the transfer of clamping forces from the screw to the collar/shaft interface while preventing stick-slip. This allows for proper and consistent seating of the screw which is a critical factor in shaft collar performance. The use of premium materials ensures full utilization of available screw torque without shaft collar deformation under maximum load conditions.
Ruland shaft collars are manufactured from bar stock sourced from select North American mills and available in 1215 lead-free steel, 303 and 316 stainless steel, 2024 aluminum, titanium, and engineered plastic. They are offered with smooth or threaded bores ranging in size from 1/8" (3mm) to 6" (150mm). The Ruland name and bore size are stamped on every shaft collar for ease of identification. Custom bore geometry, special OD or width sizes, and mounting or tapped holes are available by special request.
- Tightly controlled face to bore perpendicularity for proper alignment of mating components.
- Fastening hardware tests above industry standards for maximum torque capabilities.
- Machined to a fine burr free finish.
- Two-piece styles are mated throughout the manufacturing process for proper fit and alignment.
- RoHS2 and REACH compliant.
- Carefully made in our Marlborough, Massachusetts factory and available for immediate delivery.
Inch Dimension |
Inch Dimension |
Inch Dimension |
Inch Dimension |
Inch Dimension |
Metric Dimension |
Metric Dimension |
Metric Dimension |
Metric Dimension |
Metric Dimension |
Inch Dimension |
Inch Dimension |
Inch Dimension |
Inch Dimension |
Inch Dimension |
Metric Dimension |
Metric Dimension |
Metric Dimension |
Metric Dimension |
Metric Dimension |
Custom Designs
As a service to our customers, we offer our vast machining experience and talents to meet special needs with custom parts. Our shop is equipped with the machines and skilled people necessary to fill all of your special requirements. If you don't see what you are looking for in our standard line, please inquire about our custom fabrication service.
Examples of Past Specials:
- Balanced designs
- Machined flats and mounting screws
- Left-hand or acme threads
- Custom bore sizes and geometry
- Custom lengths, widths and outside diameters
- Custom color or finish
- Custom material and hardware requests
- And Many Others... Please Contact Us for More Information