Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Dimensions | |||
---|---|---|---|
Agujero (B1) |
0,5000 pulg |
Diámetro exterior OD |
41,3 mm (1,625 pulg) |
Penetración del eje máximo (B1) |
0,710 pulg |
Tolerancia del agujero |
+0,001 pulg / -0,000 pulg |
Ancho del cubo (LH) |
0,710 pulg |
Longitud L |
50,8 mm (2,000 pulg) |
Tolerancia del eje recomendada |
+0,0000 pulg / -0,0005 pulg |
||
Fastening Hardware | |||
Tornillo de fijación forjado |
M5 |
Número de tornillos |
2 cada 90° de separación |
Material del tornillo |
Series de acero inoxidable 18-8 300 |
Acabado de los tornillos |
Bright |
Par de apriete |
3,2 Nm |
Tamaño de la llave hexagonal |
2,5 mm |
Performance Specifications | |||
Torque Specifications |
Torque ratings vary with insert selection |
Desalineación angular |
0,5° |
Desalineación paralela |
0,010 pulg (0,25 mm) |
Máxima desalineación paralela |
0,163 pulg (4,13 mm) |
Movimiento axial |
0,006 pulg (0,15 mm) |
Momento de inercia |
0.1503 lb-in2 |
Velocidad máxima |
4.500 RPM |
Recommended Inserts |
|
Bearing Support Required |
sí |
¿Juego cero? |
Sí |
¿Diseño equilibrado? |
Sí |
Mechanical Fuse |
Sí |
Additional Information | |||
UPC |
634529239889 |
País de origen |
EE.UU. |
Especificación de material |
Barra austenítica no magnética tipo AISI 303 |
Acabado |
Bright |
Especificación de acabado |
Bright, No Plating |
Fabricante |
Ruland Manufacturing |
Temperatura |
Acetal -23°C a 65°C |
peso |
0.186700 |
Tariff Code |
8483.60.8000 |
UNSPC |
31163015 |
Product Notes | |||
Nota 1 |
"Performance ratings are for guidance only. The user must determine suitability for a particular application." |
Nota 2 |
"Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. In some cases` especially when the smallest standard bores are used or where shafts are undersized` slippage on the shaft is possible below the rated torque of the disks. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance." |
Prop. 65 |
|
||