Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Dimensions | |||
---|---|---|---|
Agujero (B1) |
0,5000 pulg |
Chavetero (K) |
1/8 pulg |
Diámetro exterior OD |
41,3 mm (1,625 pulg) |
Penetración del eje máximo (B1) |
0,710 pulg |
Tolerancia del agujero |
+0,001 pulg / -0,000 pulg |
Ancho del cubo (LH) |
0,710 pulg |
Longitud L |
50,8 mm (2,000 pulg) |
Tolerancia del eje recomendada |
+0,0000 pulg / -0,0005 pulg |
Fastening Hardware | |||
Tornillo de fijación forjado |
M5 |
Número de tornillos |
2 cada 90° de separación |
Material del tornillo |
Alloy Steel |
Acabado de los tornillos |
Black Oxide |
Par de apriete |
4 Nm |
Tamaño de la llave hexagonal |
2,5 mm |
Performance Specifications | |||
Torque Specifications |
Torque ratings vary with insert selection |
Desalineación angular |
0,5° |
Desalineación paralela |
0,010 pulg (0,25 mm) |
Máxima desalineación paralela |
0,163 pulg (4,13 mm) |
Movimiento axial |
0,006 pulg (0,15 mm) |
Momento de inercia |
0.0528 lb-in2 |
Velocidad máxima |
4.500 RPM |
Recommended Inserts |
|
Bearing Support Required |
sí |
¿Juego cero? |
Sí |
¿Diseño equilibrado? |
Sí |
Mechanical Fuse |
Sí |
Additional Information | |||
UPC |
634529118818 |
País de origen |
EE.UU. |
Especificación de material |
Jaw and Oldham |
Acabado |
Black Anodized |
Especificación de acabado |
Anodizado con Sulfúrico MIL-A-8625 Tipo II, Clase 2 y ASTM B580 Tipo B Anodizado Negro |
Fabricante |
Ruland Manufacturing |
Temperatura |
Acetal -23°C a 65°C |
peso |
0.065300 |
Tariff Code |
8483.60.8000 |
UNSPC |
31163015 |
Product Notes | |||
Nota 1 |
"Now available in stainless steel!" |
Nota 2 |
"Performance ratings are for guidance only. The user must determine suitability for a particular application." |
Nota 3 |
"Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. Please consult technical support for more assistance." |
Prop. 65 |
|