Collarínes de Eje Montable

Los collarínes de eje montables se utilizan para montar sensores, accesorios y otros componentes en collarínes de eje o entre sí. Están disponibles en tres estilos diferentes, incluyendo: agujeros con diámetro exterior, planos y agujeros con diámetro exterior, y de liberación rápida. Los agujeros de todos los estilos son de rosca y se ajustan a los tornillos estándar, torx o set para ofrecer flexibilidad en función de lo que se debe montar. Están disponibles en acero sin plomo 1215 con un acabado de óxido negro, aluminio 2024 de alta resistencia y acero inoxidable 303 en tamaños de diámetro de 3/8" a 2" y 10mm a 40mm. Esta variedad de estilos y materiales permite a los diseñadores adaptar el rendimiento del collarín de eje a los requerimientos de la aplicación.

JUMP TO: About Why Ruland Custom Designs Productos

About

Face Holes

Mountable shaft collars with drilled/threaded face holes are used for mounting shaft collars to sprockets, pulleys, metallic plates, or other components. The drilled holes give designers the most mounting flexibility allowing for the use of inch or metric hardware with socket heads, set screws, or button heads to mount the shaft collar. The threaded holes give users the most secure interface between the collar and the mated component. They have the same thread size as the standard collar, reducing installation time. Ruland manufactures face mount shaft collars with precise face to bore perpendicularity (TIR ≤ .002" or 0.05mm), which is critical when they are being mounted directly to another component. They are available in bore sizes ranging from 3/8” to 3” (10mm to 80mm). Ruland offers face mount shaft collars in 1215 lead-free steel for high strength, 2024 aluminum with an anodized finish for lightweight, and 303 stainless steel for corrosion resistance.

EXPLORE >>

Flats & Holes

Mountable shaft collars with outer diameter (OD) flats and holes are used for mounting sensor brackets, mounting collars to each other, and welding items such as plates or hinges to the collar. They are comst commonly used in applications such as cylinders where the collar can be mounted to a base plate. Along with mounting they can be used as a traditional shaft collar for guiding, spacing, stopping, and component alignment. They have tightly controlled face to bore perpendicularity (TIR ≤ .002" or 0.05mm) which is critical when the shaft collar is used as a load-bearing face, mechanical stop, or for aligning components on a shaft. The tapped holes in the OD fit standard cap, torx, or set screws allowing the designer to use hardware of their choosing to match application requirements. Mountable shaft collars with OD holes are available in 1215 lead-free steel for the greatest holding power, 2024 high-strength aluminum for light weight, and 303 stainless steel for corrosion resistance. Ruland manufactures them in one- and two-piece clamp styles with bore sizes range from 3/8” to 2” and 10mm to 40mm.

EXPLORE >>

Quick Clamping

Quick clamping mountable shaft collars combine a standard collar with outer diameter (OD) flats and holes and adjustable clamping handle. This creates a mountable shaft collar than can be rapidly adjusted without the use of tools. Quick clamping mountable shaft collars are well suited for sensor systems or welding applications where frequent adjustment is required. The shaft collar is manufactured by Ruland with tightly controlled face to bore perpendicularity (TIR ≤ .002" or 0.05mm) which is critical when the shaft collar is used as a load-bearing face, mechanical stop, or for aligning components on a shaft. The tapped holes in the OD fit standard cap, torx, or set screws allowing the designer to use hardware of their choosing to match application requirements. Mountable shaft collars with OD holes are available in 1215 lead-free steel for the greatest holding power, 2024 high-strength aluminum for light weight, and 303 stainless steel for corrosion resistance. Bore sizes range from 1/2” to 1-1/2” and 12mm to 40mm. The adjustable clamping handle is sourced from JW Winco and is zinc die cast with a powder coated finish. They are available in black for general purpose use and orange for safety and identification.

EXPLORE >>

Productos

Create New Account

Información Personal

Nombre

Apellidos

Información de dirección

Empresa

Numero de teléfono

Dirección postal (Calle, Nº de Casa, Código Postal)

Dirección

Ciudad

Estado/Provincia

Código Postal

País

Información de inicio de sesión

Correo electrónico

Contraseña

Password Strength: Sin contraseña

Confirmar contraseña

Recordarme

FHD-MCL-10-AN
Tan bajo como $18,96 $46,53

Ruland FHD-MCL-10-AN, 10mm Face Mount Shaft Collar with Drilled Hole, Anodized Aluminum, One-Piece Clamp Style, 24mm OD, 9mm Width

Añadir para comparar
FHD-MCL-10-F
Tan bajo como $7,25 $17,79

Ruland FHD-MCL-10-F, 10mm Face Mount Shaft Collar with Drilled Hole, Black Oxide Steel, One-Piece Clamp Style, 24mm OD, 9mm Width

Añadir para comparar
FHD-MCL-10-SS
Tan bajo como $14,79 $36,29

Ruland FHD-MCL-10-SS, 10mm Face Mount Shaft Collar with Drilled Hole, 303 Stainless Steel, One-Piece Clamp Style, 24mm OD, 9mm Width

Añadir para comparar
FHD-MCL-11-AN
Tan bajo como $19,40 $47,61

Ruland FHD-MCL-11-AN, 11mm Face Mount Shaft Collar with Drilled Hole, Anodized Aluminum, One-Piece Clamp Style, 28mm OD, 11mm Width

Añadir para comparar
FHD-MCL-11-F
Tan bajo como $7,65 $18,77

Ruland FHD-MCL-11-F, 11mm Face Mount Shaft Collar with Drilled Hole, Black Oxide Steel, One-Piece Clamp Style, 28mm OD, 11mm Width

Añadir para comparar
FHD-MCL-11-SS
Tan bajo como $15,02 $36,86

Ruland FHD-MCL-11-SS, 11mm Face Mount Shaft Collar with Drilled Hole, 303 Stainless Steel, One-Piece Clamp Style, 28mm OD, 11mm Width

Añadir para comparar
FHD-MCL-12-AN
Tan bajo como $19,40 $47,61

Ruland FHD-MCL-12-AN, 12mm Face Mount Shaft Collar with Drilled Hole, Anodized Aluminum, One-Piece Clamp Style, 28mm OD, 11mm Width

Añadir para comparar
FHD-MCL-12-F
Tan bajo como $7,65 $18,77

Ruland FHD-MCL-12-F, 12mm Face Mount Shaft Collar with Drilled Hole, Black Oxide Steel, One-Piece Clamp Style, 28mm OD, 11mm Width

Añadir para comparar
FHD-MCL-12-SS
Tan bajo como $15,02 $36,86

Ruland FHD-MCL-12-SS, 12mm Face Mount Shaft Collar with Drilled Hole, 303 Stainless Steel, One-Piece Clamp Style, 28mm OD, 11mm Width

Añadir para comparar
FHD-MCL-13-AN
Tan bajo como $18,74 $45,97

Ruland FHD-MCL-13-AN, 13mm Face Mount Shaft Collar with Drilled Hole, Anodized Aluminum, One-Piece Clamp Style, 30mm OD, 11mm Width

Añadir para comparar
FHD-MCL-13-F
Tan bajo como $8,53 $20,94

Ruland FHD-MCL-13-F, 13mm Face Mount Shaft Collar with Drilled Hole, Black Oxide Steel, One-Piece Clamp Style, 30mm OD, 11mm Width

Añadir para comparar
FHD-MCL-13-SS
Tan bajo como $17,30 $42,44

Ruland FHD-MCL-13-SS, 13mm Face Mount Shaft Collar with Drilled Hole, 303 Stainless Steel, One-Piece Clamp Style, 30mm OD, 11mm Width

Añadir para comparar
FHD-MCL-14-AN
Tan bajo como $19,94 $48,93

Ruland FHD-MCL-14-AN, 14mm Face Mount Shaft Collar with Drilled Hole, Anodized Aluminum, One-Piece Clamp Style, 30mm OD, 11mm Width

Añadir para comparar
FHD-MCL-14-F
Tan bajo como $8,53 $20,94

Ruland FHD-MCL-14-F, 14mm Face Mount Shaft Collar with Drilled Hole, Black Oxide Steel, One-Piece Clamp Style, 30mm OD, 11mm Width

Añadir para comparar
FHD-MCL-14-SS
Tan bajo como $17,30 $42,44

Ruland FHD-MCL-14-SS, 14mm Face Mount Shaft Collar with Drilled Hole, 303 Stainless Steel, One-Piece Clamp Style, 30mm OD, 11mm Width

Añadir para comparar
FHD-MCL-15-AN
Tan bajo como $20,16 $49,46

Ruland FHD-MCL-15-AN, 15mm Face Mount Shaft Collar with Drilled Hole, Anodized Aluminum, One-Piece Clamp Style, 34mm OD, 13mm Width

Añadir para comparar
FHD-MCL-15-F
Tan bajo como $8,28 $20,31

Ruland FHD-MCL-15-F, 15mm Face Mount Shaft Collar with Drilled Hole, Black Oxide Steel, One-Piece Clamp Style, 34mm OD, 13mm Width

Añadir para comparar
FHD-MCL-15-SS
Tan bajo como $18,26 $44,79

Ruland FHD-MCL-15-SS, 15mm Face Mount Shaft Collar with Drilled Hole, 303 Stainless Steel, One-Piece Clamp Style, 34mm OD, 13mm Width

Añadir para comparar
FHD-MCL-16-AN
Tan bajo como $20,16 $49,46

Ruland FHD-MCL-16-AN, 16mm Face Mount Shaft Collar with Drilled Hole, Anodized Aluminum, One-Piece Clamp Style, 34mm OD, 13mm Width

Añadir para comparar
FHD-MCL-16-F
Tan bajo como $8,28 $20,31

Ruland FHD-MCL-16-F, 16mm Face Mount Shaft Collar with Drilled Hole, Black Oxide Steel, One-Piece Clamp Style, 34mm OD, 13mm Width

Añadir para comparar
FHD-MCL-16-SS
Tan bajo como $18,26 $44,79

Ruland FHD-MCL-16-SS, 16mm Face Mount Shaft Collar with Drilled Hole, 303 Stainless Steel, One-Piece Clamp Style, 34mm OD, 13mm Width

Añadir para comparar
FHD-MCL-17-AN
Tan bajo como $21,71 $53,27

Ruland FHD-MCL-17-AN, 17mm Face Mount Shaft Collar with Drilled Hole, Anodized Aluminum, One-Piece Clamp Style, 36mm OD, 13mm Width

Añadir para comparar
FHD-MCL-17-F
Tan bajo como $9,06 $22,22

Ruland FHD-MCL-17-F, 17mm Face Mount Shaft Collar with Drilled Hole, Black Oxide Steel, One-Piece Clamp Style, 36mm OD, 13mm Width

Añadir para comparar
FHD-MCL-17-SS
Tan bajo como $19,54 $47,95

Ruland FHD-MCL-17-SS, 17mm Face Mount Shaft Collar with Drilled Hole, 303 Stainless Steel, One-Piece Clamp Style, 36mm OD, 13mm Width

Añadir para comparar

Part number	Bore (B1)	Material	Outer Diameter (OD)
FHD-MCL-10-AN	10 mm	Anodized Aluminum	24 mm
FHD-MCL-10-F	10 mm	Black Oxide Steel	24 mm
FHD-MCL-10-SS	10 mm	303 Stainless Steel	24 mm
FHD-MCL-11-AN	11 mm	Anodized Aluminum	28 mm
FHD-MCL-11-F	11 mm	Black Oxide Steel	28 mm
FHD-MCL-11-SS	11 mm	303 Stainless Steel	28 mm
FHD-MCL-12-AN	12 mm	Anodized Aluminum	28 mm
FHD-MCL-12-F	12 mm	Black Oxide Steel	28 mm
FHD-MCL-12-SS	12 mm	303 Stainless Steel	28 mm
FHD-MCL-13-AN	13 mm	Anodized Aluminum	30 mm
FHD-MCL-13-F	13 mm	Black Oxide Steel	30 mm
FHD-MCL-13-SS	13 mm	303 Stainless Steel	30 mm
FHD-MCL-14-AN	14 mm	Anodized Aluminum	30 mm
FHD-MCL-14-F	14 mm	Black Oxide Steel	30 mm
FHD-MCL-14-SS	14 mm	303 Stainless Steel	30 mm
FHD-MCL-15-AN	15 mm	Anodized Aluminum	34 mm
FHD-MCL-15-F	15 mm	Black Oxide Steel	34 mm
FHD-MCL-15-SS	15 mm	303 Stainless Steel	34 mm
FHD-MCL-16-AN	16 mm	Anodized Aluminum	34 mm
FHD-MCL-16-F	16 mm	Black Oxide Steel	34 mm
FHD-MCL-16-SS	16 mm	303 Stainless Steel	34 mm
FHD-MCL-17-AN	17 mm	Anodized Aluminum	36 mm
FHD-MCL-17-F	17 mm	Black Oxide Steel	36 mm
FHD-MCL-17-SS	17 mm	303 Stainless Steel	36 mm

Comparar productos

Quitar este producto

No tiene ningún artículo para comparar.

My Favorites

Últimos elementos añadidos

No tiene ningún elemento en su lista de deseos.

Collarínes de Eje Montable

About

Productos

Please Login to Download CAD

Create New Account

Browse By