Universal Joints

Ruland universal joints are available in single and double configurations with friction or needle bearings. Single U-joints are comprised of two yokes and a trunnion assembly to allow for use in confined spaces and angular misalignment up to 45°. Double U-joints are comprised of two yokes, two trunnion assemblies, and a center yoke to allow for larger gaps between shafts, parallel misalignment, and angular misalignment up to 90°. U-joints are manufactured from high-grade alloy steel for high strength and stainless steel for corrosion resistance. They are precision-machined, selectively heat-treated, and utilize ground components for tighter tolerances, better performance, and longer life than commodity style universal joints. Universal joints are available with or without keyways in bore sizes ranging from 3/16” to 2”, 5mm to 35mm, or machinable bores for custom applications. Inch to metric conversion couplings and step bores are available by special order. Boot covers are available to prolong the life of the U-joint. Universal joints from Ruland are manufactured by Belden Universal in Illinois, USA.

GEHE ZU: Über Warum Ruland Sonderanfertigungen Artikel

Über

Friction Bearing

Friction bearing type pin-and-block universal joints from Ruland are designed for applications with moderate-to-high-torque requirements in a wide variety of industries. Also called cardan joints or pin-and-block universal joints, they are manufactured from alloy steel for high strength or stainless steel for better corrosion resistance. They are comprised of precision machined, selectively heat-treated and ground components (yokes, pins and blocks) to maximize performance and service life. Single plain bearing universal joints are best suited for space constrained applications and are capable of angular misalignment up to 45°, significantly more than commodity style single u-joints. Double u-joints are better suited for applications with a wide distance between shafts or requiring angular misalignment up to 90°.

Ruland friction universal joints are available in OD sizes ranging from 3/8” to 4” in bore sizes ranging from 3/16” to 2” or 5mm to 35mm. They can have finished bores with or without keyways or machinable bores allowing the user to make custom sizes or geometries. All bore configurations can include a set screw.

ERKUNDEN >>

Needle Bearing

Needle-bearing universal joints from Ruland are designed for applications with increased speeds, low-to-moderate loads and requirements for extended service life in industries such as medical, packaging, and robotics. Also called cardan joints, they are comprised of high-quality needle-roller bearings, precision machined trunnions with hardened and ground journals and a choice of alloy or stainless-steel yokes for reduced friction and increased performance in applications requiring precision and an extended service life. The needle bearings are pre-lubricated and require no maintenance, reducing machine downtime and increasing service life. Most u-joints include dust seals for the bearings.

Needle-bearing universal joints are available with stainless steel yokes for better corrosion resistance. Boots are recommended for corrosive, washdown or sanitary applications as the trunnions and bearings are alloy steel. Bores can be customized for blind configuration, preventing shaft penetration into the center joint components and providing added protection against contamination.

Ruland needle-bearing universal joints are available in OD sizes ranging from 3/4” to 2” a plain bore or bore w/ keyway in sizes from 3/8” to 1” or 8mm to 25mm. All bore types are available with a single set screw.

ERKUNDEN >>

Boot Covers

Boot cover kits protect the universal joint from unwanted contaminants such as dust and can be packed with grease for lubrication retention. Boot kits come with a pair of zip ties that seat into grooves on each yoke of the universal joint to ensure a tight seal. Boots are made of Nitrile for durability and abrasion resistance, helping to protect the boot from being damaged and grease leaking out or contaminants entering the joint. Nitrile also has high resistance to petroleum-based oils and fuels, silicone greases, hydraulic fluids, water, and alcohol which are commonly present in operating environments where this universal joint is used.

ERKUNDEN >>

Clamp Style

Clamp style universal joints share similar characteristics to standard single universal joints while providing additional benefits. The clamp screw design will not mar the shaft allowing for easier assembly, infinite adjustability, and use on all shaft types. It also evenly distributes compressive forces around the shaft for a more secure connection when compared to set screw types. Clamp style universal joints are supplied with Ruland’s unique Nypatch® anti-vibration hardware. Nypatch® is a proprietary process that involves depositing a 360-degree coating of Nylon on several threads of the socket head cap screws. It allows for repeated screw installations, prevents screws from loosening during operation, and provides the necessary dissimilar material in stainless steel joints to reduce galling. Ruland is a leading manufacturer of clamping technology and manufactures the clamp feature, bores, and keyways in our Massachusetts, USA, factory. Clamp style universal joints are offered in steel for high torque and stainless steel for corrosion resistance. They are available in straight bore sizes from 1/4" to 1-1/4”. Clamp style universal joints can be combined with a boot to protect the joint from contaminants in the operating environment. The boot can be packed with grease for infinite life, reducing maintenance on the universal joint leading to more machine uptime.

ERKUNDEN >>

Artikel

Neuen Account erstellen

Persönliche Daten

Vorname

Nachname

Adressinformationen

Firma

Telefonnummer

Straße

Adresse

Stadt

Bundesland

PLZ

Land

Anmeldeinformationen

Passwort

Passwortstärke: Kein Passwort

Passwort bestätigen

Angemeldet bleiben

MUS51-30-30-F
Ab 405,90 € 541,20 €

Ruland MUS51-30-30-F, 30mm x 30mm Single Universal Joint, Friction Bearing, Steel, 50.7mm OD, 122.0mm Length

Zur Vergleichsliste hinzufügen
MUS51-30-30-SS
Ab 487,05 € 649,40 €

Ruland MUS51-30-30-SS, 30mm x 30mm Single Universal Joint, Friction Bearing, Stainless Steel, 50.7mm OD, 139.7mm Length

Zur Vergleichsliste hinzufügen
MUS64-30-30-F-122
Ab 764,42 € 1.019,22 €

Ruland MUS64-30-30-F-122, 30mm x 30mm Single Universal Joint, Friction Bearing, Steel, 63.4mm OD, 122.0mm Length

Zur Vergleichsliste hinzufügen
MUS64-30-30-F-140
Ab 802,68 € 1.070,24 €

Ruland MUS64-30-30-F-140, 30mm x 30mm Single Universal Joint, Friction Bearing, Steel, 63.4mm OD, 140.0mm Length

Zur Vergleichsliste hinzufügen
MUS64-30-30-SS
Ab 917,28 € 1.223,04 €

Ruland MUS64-30-30-SS, 30mm x 30mm Single Universal Joint, Friction Bearing, Stainless Steel, 63.4mm OD, 177.8mm Length

Zur Vergleichsliste hinzufügen
MUSK64-30-30-F
Ab 794,99 € 1.059,98 €

Ruland MUSK64-30-30-F, 30mm x 30mm Single Universal Joint, Friction Bearing, Steel, Set Screw With Keyway, 63.4mm OD, 122.0mm Length

Zur Vergleichsliste hinzufügen
MUSSK51-30-30-F
Ab 434,77 € 579,69 €

Ruland MUSSK51-30-30-F, 30mm x 30mm Single Universal Joint, Friction Bearing, Steel, Set Screw With Keyway, 50.7mm OD, 122.0mm Length

Zur Vergleichsliste hinzufügen
MUSSK51-30-30-SS
Ab 521,72 € 695,64 €

Ruland MUSSK51-30-30-SS, 30mm x 30mm Single Universal Joint, Friction Bearing, Stainless Steel, Set Screw With Keyway, 50.7mm OD, 139.7mm Length

Zur Vergleichsliste hinzufügen
MUSSK64-30-30-F
Ab 834,75 € 1.113,00 €

Ruland MUSSK64-30-30-F, 30mm x 30mm Single Universal Joint, Friction Bearing, Steel, Set Screw With Keyway, 63.4mm OD, 140.0mm Length

Zur Vergleichsliste hinzufügen
MUSSK64-30-30-SS
Ab 953,99 € 1.271,98 €

Ruland MUSSK64-30-30-SS, 30mm x 30mm Single Universal Joint, Friction Bearing, Stainless Steel, Set Screw With Keyway, 63.4mm OD, 177.8mm Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-1 1/8\"-F

Download CAD

UD32-30MM-1 1/8"-F
Ab 794,59 € 1.059,45 €

Ruland UD32-30MM-1 1/8"-F, 30mm x 1 1/8" Double Universal Joint, Friction Bearing, Steel, 1.995" (50.7mm) OD, 8.688" (220.7mm) Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-1 1/8\"-SS

Download CAD

UD32-30MM-1 1/8"-SS
Ab 1.067,27 € 1.423,03 €

Ruland UD32-30MM-1 1/8"-SS, 30mm x 1 1/8" Double Universal Joint, Friction Bearing, Stainless Steel, 1.995" (50.7mm) OD, 8.688" (220.7mm) Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-1\"-F

Download CAD

UD32-30MM-1"-F
Ab 794,59 € 1.059,45 €

Ruland UD32-30MM-1"-F, 30mm x 1" Double Universal Joint, Friction Bearing, Steel, 1.995" (50.7mm) OD, 8.688" (220.7mm) Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-1\"-SS

Download CAD

UD32-30MM-1"-SS
Ab 1.067,27 € 1.423,03 €

Ruland UD32-30MM-1"-SS, 30mm x 1" Double Universal Joint, Friction Bearing, Stainless Steel, 1.995" (50.7mm) OD, 8.688" (220.7mm) Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-1/2\"-F

Download CAD

UD32-30MM-1/2"-F
Ab 794,59 € 1.059,45 €

Ruland UD32-30MM-1/2"-F, 30mm x 1/2" Double Universal Joint, Friction Bearing, Steel, 1.995" (50.7mm) OD, 8.688" (220.7mm) Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-1/2\"-SS

Download CAD

UD32-30MM-1/2"-SS
Ab 1.067,27 € 1.423,03 €

Ruland UD32-30MM-1/2"-SS, 30mm x 1/2" Double Universal Joint, Friction Bearing, Stainless Steel, 1.995" (50.7mm) OD, 8.688" (220.7mm) Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-20MM-F

Download CAD

UD32-30MM-20MM-F
Ab 794,59 € 1.059,45 €

Ruland UD32-30MM-20MM-F, 30mm x 20mm Double Universal Joint, Friction Bearing, Steel, 50.7mm OD, 220.7mm Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-20MM-SS

Download CAD

UD32-30MM-20MM-SS
Ab 1.067,27 € 1.423,03 €

Ruland UD32-30MM-20MM-SS, 30mm x 20mm Double Universal Joint, Friction Bearing, Stainless Steel, 50.7mm OD, 220.7mm Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-22MM-F

Download CAD

UD32-30MM-22MM-F
Ab 794,59 € 1.059,45 €

Ruland UD32-30MM-22MM-F, 30mm x 22mm Double Universal Joint, Friction Bearing, Steel, 50.7mm OD, 220.7mm Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-22MM-SS

Download CAD

UD32-30MM-22MM-SS
Ab 1.067,27 € 1.423,03 €

Ruland UD32-30MM-22MM-SS, 30mm x 22mm Double Universal Joint, Friction Bearing, Stainless Steel, 50.7mm OD, 220.7mm Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-24MM-F

Download CAD

UD32-30MM-24MM-F
Ab 794,59 € 1.059,45 €

Ruland UD32-30MM-24MM-F, 30mm x 24mm Double Universal Joint, Friction Bearing, Steel, 50.7mm OD, 220.7mm Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-24MM-SS

Download CAD

UD32-30MM-24MM-SS
Ab 1.067,27 € 1.423,03 €

Ruland UD32-30MM-24MM-SS, 30mm x 24mm Double Universal Joint, Friction Bearing, Stainless Steel, 50.7mm OD, 220.7mm Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-25MM-F

Download CAD

UD32-30MM-25MM-F
Ab 794,59 € 1.059,45 €

Ruland UD32-30MM-25MM-F, 30mm x 25mm Double Universal Joint, Friction Bearing, Steel, 50.7mm OD, 220.7mm Length

Zur Vergleichsliste hinzufügen
CAD-Datei:
UD32-30MM-25MM-SS

Download CAD

UD32-30MM-25MM-SS
Ab 1.067,27 € 1.423,03 €

Ruland UD32-30MM-25MM-SS, 30mm x 25mm Double Universal Joint, Friction Bearing, Stainless Steel, 50.7mm OD, 220.7mm Length

Zur Vergleichsliste hinzufügen

Part number	Bore (B1)	Small Bore (B2)	Length (L)	Material
MUS51-30-30-F	30 mm	30 mm	122,0 mm	Legierter Stahl
MUS51-30-30-SS	30 mm	30 mm	139,7 mm	Edelstahl
MUS64-30-30-F-122	30 mm	30 mm	122,0 mm	Legierter Stahl
MUS64-30-30-F-140	30 mm	30 mm	140,0 mm	Legierter Stahl
MUS64-30-30-SS	30 mm	30 mm	177,8 mm	Edelstahl
MUSK64-30-30-F	30 mm	30 mm	122,0 mm	Legierter Stahl
MUSSK51-30-30-F	30 mm	30 mm	122,0 mm	Legierter Stahl
MUSSK51-30-30-SS	30 mm	30 mm	139,7 mm	Edelstahl
MUSSK64-30-30-F	30 mm	30 mm	140,0 mm	Legierter Stahl
MUSSK64-30-30-SS	30 mm	30 mm	177,8 mm	Edelstahl
UD32-30MM-1 1/8"-F	30 mm	1,1250 zoll	220,7 mm (8,688 zoll)	Legierter Stahl
UD32-30MM-1 1/8"-SS	30 mm	1,1250 zoll	220,7 mm (8,688 zoll)	Edelstahl
UD32-30MM-1"-F	30 mm	1,0000 zoll	220,7 mm (8,688 zoll)	Legierter Stahl
UD32-30MM-1"-SS	30 mm	1,0000 zoll	220,7 mm (8,688 zoll)	Edelstahl
UD32-30MM-1/2"-F	30 mm	0,5000 zoll	220,7 mm (8,688 zoll)	Legierter Stahl
UD32-30MM-1/2"-SS	30 mm	0,5000 zoll	220,7 mm (8,688 zoll)	Edelstahl
UD32-30MM-20MM-F	30 mm	20 mm	220,7 mm	Legierter Stahl
UD32-30MM-20MM-SS	30 mm	20 mm	220,7 mm	Edelstahl
UD32-30MM-22MM-F	30 mm	22 mm	220,7 mm	Legierter Stahl
UD32-30MM-22MM-SS	30 mm	22 mm	220,7 mm	Edelstahl
UD32-30MM-24MM-F	30 mm	24 mm	220,7 mm	Legierter Stahl
UD32-30MM-24MM-SS	30 mm	24 mm	220,7 mm	Edelstahl
UD32-30MM-25MM-F	30 mm	25 mm	220,7 mm	Legierter Stahl
UD32-30MM-25MM-SS	30 mm	25 mm	220,7 mm	Edelstahl

Produkte vergleichen

Diesen Artikel entfernen

Sie haben keine Artikel zum vergleichen.

Meine Favoriten

Zuletzt hinzugefügte Produkte

Sie haben keine Artikel auf Ihrer Wunschliste.

Universal Joints

Über

Artikel

Bitte melden Sie sich an, um die CAD-Datei herunterzuladen

Neuen Account erstellen

Einkaufsoptionen