Drehmoment-Diagramme aus Metall
Inch Forged Socket Cap Screws | |||||
INCH Clamp Screw |
Hex Key Size (in) | Seating Torque (lb-in) | |||
Alloy | Stainless | ||||
#0-80 | 0.05 | 2 | 1.3 | ||
#1-72 | 1/16 | 4 | 2.3 | ||
#2-56 | 5/64 | 6 | 3.8 | ||
#4-40 | 3/32 | 15 | 8 | ||
#6-32 | 7/64 | 28 | 15 | ||
#8-32 | 9/64 | 49 | 28 | ||
#10-32 | 5/32 | 76 | 45 | ||
1/4-28 | 3/16 | 170 | 110 | ||
5/16-24 | 1/4 | 325 | 190 | ||
3/8-24 | 5/16 | 570 | 345 | ||
1/2-20 | 3/8 |
Inch Forged Socket Set Screws | |||||
INCH Set Screw |
Hex Key Size (in) | Seating Torque (lb-in) | |||
Alloy | Stainless | ||||
#1-72 | 0.035 | 0.8 | .48 | ||
#2-56 | 0.035 | 1.8 | 1.08 | ||
#4-40 | 0.050 | 5 | 3 | ||
#6-32 | 1/16 | 10 | 6 | ||
#8-32 | 5/64 | 15 | 12 | ||
#10-32 | 3/32 | 25 | 18 | ||
1/4-20 | 1/8 | 87 | 70 | ||
5/16-18 | 5/32 | 165 | 130 | ||
3/8-16 | 3/16 | 290 | 230 | ||
1/2-13 | 1/4 | 620 | 500 |
Metric Forged Socket Cap Screws | |||||
METRIC Clamp Screw |
Hex Key Size (mm) | Seating Torque (Nm) | |||
Alloy | Stainless | ||||
M1.6 | 1.5 | 0.29 | - | ||
M2 | 1.5 | 0.6 | .36 | ||
M2.5 | 2.0 | 1.21 | .73 | ||
M3 | 2.5 | 2.1 | 1.1 | ||
M4 | 3.0 | 4.6 | 2.5 | ||
M5 | 4.0 | 9.5 | 5.4 | ||
M6 | 5.0 | 16 | 9.6 | ||
M8 | 6.0 | 39 | 23 | ||
M10 | 8.0 | 77 | 46 | ||
M12 | 10.0 | 135 | - |
Metric Forged Socket Set Screws | |||||
METRIC Set Screw |
Hex Key Size (mm) | Seating Torque (Nm) | |||
Alloy | Stainless | ||||
M2 | 0.9 | 0.21 | 0.13 | ||
M2.5 | 1.3 | 0.57 | 0.44 | ||
M3 | 1.5 | 0.92 | 0.73 | ||
M4 | 2.0 | 2.2 | 1.76 | ||
M5 | 2.5 | 4 | 3.20 | ||
M6 | 3.0 | 7.2 | 5.76 | ||
M8 | 4.0 | 17 | 13.60 | ||
M10 | 5.0 | 33 | 26.40 |
LIABILITY DISCLAIMER
The information chart presented on this page are typical values under certain test conditions and are not a guarantee of average values nor a guarantee of maximum or minimum values under all conditions. Thrust values shown are FAILURE MODE. They are shown solely for the reader to utilize appropriate testing equipment to make his/her own evaluation, and are not intended by Ruland Manufacturing Co., Inc., as warranties, either express or implied, of fitness for a given purpose. A full disclaimer and limited warranty can also be found on this site.