Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team

OD12/19-AT

4,84 €
Menge Preis (USD)
1 4,84 €
20 4,40 €
50 3,67 €
100 3,30 €
200 Angebot anfordern
Auf Lager
Registered users receive a 5% discount
Ruland OD12/19-AT, Oldham Kupplung Lamelle, Azetal, 0.750" (19.1mm) außendurchmesserm

Ähnliche Produkte

PRODUKTSPEZIFIKATIONEN

Ruland OD12/19-AT ist eine Oldham-Kupplungsscheibe, die für Naben mit einem 0.750 zoll / 19.1mm von außendurchmesserm ausgelegt ist. Es ist ein Teil eines dreiteiligen Designs, das aus zwei Naben aus eloxiertem Aluminium oder Edelstahl besteht, deren Nuten in eine passende Kupplungsscheibe eingepresst werden. Dieses dreiteilige Design ermöglicht eine hochgradig anpassbare Kupplung, die das einfache Kombinieren von Klemm- oder Gewindestiftnaben mit zölligen- oder metrischen Bohrungen mit und ohne Paßfedernut erlaubt. OD12/19-AT wird aus Acetal hergestellt, um Spielfreiheit und hohe Verwindungssteifigkeit zu gewährleisten. Oldham-Kupplungen eignen sich für alle Arten von Fehlausrichtungen und sind besonders nützlich bei Anwendungen mit hohem Parallelversatz (bis zu 10% des AD der Kupplung).. Sie arbeiten mit geringen Lagerlasten und schützen empfindliche Systemkomponenten wie Lager. Sie sind gewuchtet und reduzieren Vibrationen bei Geschwindigkeiten von bis zu 6.000 U / min. Alle Schrauben sind metrisch und entsprechen DIN 912 12.9 für maximale Drehmomente. OD12/19-AT ist RoHS3 and REACH konform.

PRODUKTSPEZIFIKATIONEN

Abmessungen

Außendurchmesser (OD)

19,1 mm (0,750 zoll)

Leistungsbeschreibungen

Nenndrehmoment

20 zoll-lb (2,25 Nm)

Statisches Bruchmoment

93 zoll-lb (10,5 Nm)

Winkelversatz

0,5°

Paralellversatz

0,008 zoll (0,20 mm)

Max Paralellversatz

0,075 zoll (1,91 mm)

Axialbewegung

0,004 zoll (0,10 mm)

Torsionssteife

23,3 lb-zoll/Deg (2,63 Nm/Deg)

Trägheitsmoment

0.00020 lb-in2 (5.794 X 10-8 kg-m2)

Maximale Geschwindigkeit

4.500 U/min

Bearing Support Required

Ja

spielfrei?

Ja

Mechanical Fuse

Ja

zusätzliche Information

UPC

634529059937

Herkunftsland

USA

Materialspezifikation

Acetal

Spezifikation Oberflächenbehandlung

Poliert

Hersteller

Ruland Manufacturing

Temperaturbereich

-23°C bis 65°C

Gewicht (kg)

0.001200

Tariff Code

8483.60.8000

UNSPC

31163015

Produkthinweise

Anmerkung 1

Leistungsdaten stellen keine Garantie dar, sondern liefern Hilfe für eigene Tests und Auswertungen für spezielle Anwendungen.

Anmerkung 2

Die Drehmomentangaben basieren auf den Bruchdrehmomenten der Übertragungsscheiben. Unter normalen/typischen Bedingungen können die Naben diesen Drehmoment sicher übertragen. In Sonderfällen, wenn z.B. die kleinste angebotene Nabenbohrung verwendet wird oder die Welle nicht passgenau ist, ist Wellenschlupf auch unterhalb des maximalen Drehmoments möglich. Zur besseren Befestigung der Naben auf der Welle, sind Passfedernuten auf Anfrage erhältlich. Bitte kontaktieren sie uns zur weiteren Beratung.

Prop 65

WARNING This product can expose you to the chemical Formaldehyde, known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Installationsanleitung

  1. Align the bores of the coupling on the shafts that are to be joined and determine if the misalignment parameters are within the limits of the coupling.(Angular Misialignment: 0.5 deg, Parallel Misalignment: 0.008 in (0.20 mm ), Axial Motion: 0.004 in (0.10 mm )
  2. Rotate the hubs on the shaft so the drive tenons are located 90° from each other.
  3. Place a torque disk so one groove fits over the drive tenons of a hub and center the disk by hand.
  4. Insert a shim with the thickness of the coupling's axial motion rating into the groove of the torque disk.
  5. Slide the tenons of the second hub into the mating groove in the disk until it touches the shim stock.
  6. Fully tighten the screw(s) on each hub to the recommended seating torque using a hex wrench.
  7. Remove the shim stock to leave a small gap between the top of the drive tenons and the torque disk to allow for axial movement.
OD12/19-AT
© 2024 Ruland Manufacturing Co., Inc. Alle Rechte vorbehalten.