Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
| Abmessungen | |||
|---|---|---|---|
|
Bohrung (B1) |
8/7.5D mm |
Abflachung (F) |
7,50 mm |
|
Flat Tolerance |
+.002”/-.000” |
Max. Nabentiefe (B1) |
9,8 mm |
|
Außendurchmesser (OD) |
19,1 mm (0,750 zoll) |
Bohrungstoleranz |
+0,03 mm / -0,00 mm |
|
Nabenbreite (LH) |
9,78 mm |
Länge (L) |
27,2 mm (1,070 zoll) |
|
Empfohlene Wellentoleranz |
+0,000 mm / -0,013 mm |
||
| Befestigungsschraube | |||
|
Innensechskantschraube |
M2,5 |
Anzahl der Schrauben |
je 1 |
|
Schraubenwerkstoff |
Legierter Stahl |
Schraubenoberfläche |
Brüniert |
|
Größe Sechskantschlüssel |
2,0 mm |
Anzugsmoment |
1,21 Nm |
| Leistungsbeschreibungen | |||
|
Torque Specifications |
Torque ratings vary with insert selection |
Misalignment |
Misalignment ratings vary with insert selection |
|
Maximale Geschwindigkeit |
8.000 U/min |
Trägheitsmoment |
3.796 x 10-6 kg-m2 |
|
Bearing Support Required |
Ja |
Recommended Inserts |
|
|
spielfrei? |
Ja |
Ausgewogenes Design? |
Ja |
|
Fail Safe |
Ja |
||
| zusätzliche Information | |||
|
Gewicht (kg) |
0.015563 |
Temperaturbereich |
23°C bis 82°C |
|
Materialspezifikation |
2024-T351 Aluminium Stangenmaterial |
Oberflächenverarbeitung |
Glänzend Poliert |
|
Spezifikation Oberflächenbehandlung |
Glänzend Poliert |
Hersteller |
Ruland Manufacturing |
|
Recommended Gap Between Hubs |
0,020 zoll (0,50 mm) |
Herkunftsland |
USA |
|
UPC |
65432942049 |
UNSPC |
31163011 |
|
Tariff Code |
8483.60.8000 |
||
| Produkthinweise | |||
|
Anmerkung 1 |
Stainless steel hubs are available upon request. |
Anmerkung 2 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
|
Anmerkung 3 |
Torque ratings for the couplings are based on the physical limitations/failure point of the spiders. Under normal/typical conditions the hubs are capable of holding up to the nominal torque of the spiders. Please consult technical support for more assistance. |
||
