Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Dimensions | |||
---|---|---|---|
Agujero (B1) |
0,3750 pulg |
Diámetro exterior OD |
33,3 mm (1,313 pulg) |
Penetración del eje máximo (B1) |
0,590 pulg |
Tolerancia del agujero |
+0,001 pulg / -0,000 pulg |
Ancho del cubo (LH) |
0,590 pulg |
Longitud L |
47,6 mm (1,875 pulg) |
Tolerancia del eje recomendada |
+0,0000 pulg / -0,0005 pulg |
||
Fastening Hardware | |||
Tornillo de abrazadera forjado |
M3 |
Número de tornillos |
1 cada |
Material del tornillo |
Alloy Steel |
Acabado de los tornillos |
Black Oxide |
Par de apriete |
2,1 Nm |
Tamaño de la llave hexagonal |
2,5 mm |
Performance Specifications | |||
Torque Specifications |
Torque ratings vary with insert selection |
Desalineación angular |
0,5° |
Desalineación paralela |
0,008 pulg (0,20 mm) |
Máxima desalineación paralela |
0,131 pulg (3,33 mm) |
Movimiento axial |
0,006 pulg (0,15 mm) |
Momento de inercia |
0.0183 lb-in2 |
Velocidad máxima |
4.500 RPM |
Recommended Inserts |
|
Bearing Support Required |
sí |
¿Juego cero? |
Sí |
¿Diseño equilibrado? |
Sí |
Mechanical Fuse |
Sí |
Additional Information | |||
UPC |
634529059265 |
País de origen |
EE.UU. |
Especificación de material |
Jaw and Oldham |
Acabado |
Black Anodized |
Especificación de acabado |
Anodizado con Sulfúrico MIL-A-8625 Tipo II, Clase 2 y ASTM B580 Tipo B Anodizado Negro |
Fabricante |
Ruland Manufacturing |
Temperatura |
Acetal -23°C a 65°C |
peso |
0.035200 |
Tariff Code |
8483.60.8000 |
UNSPC |
31163015 |
Product Notes | |||
Nota 1 |
"Now available in stainless steel!" |
Nota 2 |
"Performance ratings are for guidance only. The user must determine suitability for a particular application." |
Nota 3 |
"Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disks. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance." |
Prop. 65 |
|