MOST13-4-SS OD8/13-PEK OST8-2-SS
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS
Dimensions | |||
---|---|---|---|
Agujero (B1) |
4 mm |
Agujero (B2) |
0,1250 pulg |
Diámetro exterior OD |
12,7 mm (0,500 pulg) |
Longitud L |
15,9 mm (0,625 pulg) |
Dimensions | |||
---|---|---|---|
Agujero (B1) |
4 mm |
Diámetro exterior OD |
12,7 mm |
Penetración del eje máximo (B1) |
5,6 mm |
Tolerancia del agujero |
+0,03 mm / -0,00 mm |
Ancho del cubo (LH) |
5,64 mm |
Longitud L |
15,9 mm |
Tolerancia del eje recomendada |
+0,000 mm / -0,013 mm |
||
Fastening Hardware | |||
Tornillo de fijación forjado |
M3 |
Número de tornillos |
1 cada |
Material del tornillo |
Series de acero inoxidable 18-8 300 |
Acabado de los tornillos |
Bright |
Par de apriete |
0,73 Nm |
Tamaño de la llave hexagonal |
1,5 mm |
Performance Specifications | |||
Torque Specifications |
Torque ratings vary with insert selection |
Desalineación angular |
0,5° |
Desalineación paralela |
0,004 pulg (0,10 mm) |
Máxima desalineación paralela |
0,050 pulg (1,27 mm) |
Movimiento axial |
0,004 pulg (0,10 mm) |
Momento de inercia |
1.209 x 10-7 kg-m2 |
Velocidad máxima |
4.500 RPM |
Recommended Inserts |
|
Bearing Support Required |
sí |
¿Juego cero? |
Sí |
Mechanical Fuse |
Sí |
||
Additional Information | |||
UPC |
634529239230 |
País de origen |
EE.UU. |
Especificación de material |
Barra austenítica no magnética tipo AISI 303 |
Acabado |
Bright |
Especificación de acabado |
Bright, No Plating |
Fabricante |
Ruland Manufacturing |
Temperatura |
Acetal -23°C a 65°C |
peso |
0.005400 |
Tariff Code |
8483.60.8000 |
UNSPC |
31163015 |
Product Notes | |||
Nota 1 |
"Performance ratings are for guidance only. The user must determine suitability for a particular application." |
Nota 2 |
"Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. In some cases` especially when the smallest standard bores are used or where shafts are undersized` slippage on the shaft is possible below the rated torque of the disks. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance." |
Prop. 65 |
WARNING This product can expose you to the chemical Nickel (metallic), known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. |
||
Installation Instructions | |||
Instrucciones de instalación |
|
Video de instalación |
Dimensions | |||
---|---|---|---|
Diámetro exterior OD |
12,7 mm (0,500 pulg) |
||
Performance Specifications | |||
Par recomendado |
6 pulg-lb (0,68 Nm) |
Par de rotura |
45 pulg-lb (5,085 Nm) |
Desalineación angular |
0,5° |
Desalineación paralela |
0,004 pulg (0,10 mm) |
Máxima desalineación paralela |
0,050 pulg (1,27 mm) |
Movimiento axial |
0,004 pulg (0,10 mm) |
Rigidez torsional |
7,4 lb-pulg/Deg (0,83 Nm/Deg) |
Momento de inercia |
0.00004 lb-in2 (1.054 X 10-8 kg-m2) |
Velocidad máxima |
4.500 RPM |
Bearing Support Required |
sí |
¿Juego cero? |
Sí |
||
Additional Information | |||
UPC |
634529216170 |
País de origen |
EE.UU. |
Especificación de material |
PEEK Disk |
Especificación de acabado |
Plain |
Fabricante |
Ruland Manufacturing |
Temperatura |
-23°C a 148°C |
peso |
0.000500 |
Tariff Code |
8483.60.8000 |
UNSPC |
31163015 |
||
Product Notes | |||
Nota 1 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Nota 2 |
Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disks. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance. |
Prop. 65 |
This product does not require a warning. |
||
Installation Instructions | |||
Instrucciones de instalación |
|
Video de instalación |
Dimensions | |||
---|---|---|---|
Agujero (B1) |
0,1250 pulg |
Diámetro exterior OD |
12,7 mm (0,500 pulg) |
Penetración del eje máximo (B1) |
0,222 pulg |
Tolerancia del agujero |
+0,001 pulg / -0,000 pulg |
Ancho del cubo (LH) |
0,222 pulg |
Longitud L |
15,9 mm (0,625 pulg) |
Tolerancia del eje recomendada |
+0,0000 pulg / -0,0005 pulg |
||
Fastening Hardware | |||
Tornillo de fijación forjado |
M3 |
Número de tornillos |
1 cada |
Material del tornillo |
Series de acero inoxidable 18-8 300 |
Acabado de los tornillos |
Bright |
Par de apriete |
0,73 Nm |
Tamaño de la llave hexagonal |
1,5 mm |
Performance Specifications | |||
Torque Specifications |
Torque ratings vary with insert selection |
Desalineación angular |
0,5° |
Desalineación paralela |
0,004 pulg (0,10 mm) |
Máxima desalineación paralela |
0,050 pulg (1,27 mm) |
Movimiento axial |
0,004 pulg (0,10 mm) |
Momento de inercia |
0.0004 lb-in2 |
Velocidad máxima |
4.500 RPM |
Recommended Inserts |
|
Bearing Support Required |
sí |
¿Juego cero? |
Sí |
Mechanical Fuse |
Sí |
||
Additional Information | |||
UPC |
634529239896 |
País de origen |
EE.UU. |
Especificación de material |
Barra austenítica no magnética tipo AISI 303 |
Acabado |
Bright |
Especificación de acabado |
Bright, No Plating |
Fabricante |
Ruland Manufacturing |
Temperatura |
Acetal -23°C a 65°C |
peso |
0.005600 |
Tariff Code |
8483.60.8000 |
UNSPC |
31163015 |
Product Notes | |||
Nota 1 |
"Performance ratings are for guidance only. The user must determine suitability for a particular application." |
Nota 2 |
"Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. In some cases` especially when the smallest standard bores are used or where shafts are undersized` slippage on the shaft is possible below the rated torque of the disks. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance." |
Prop. 65 |
WARNING This product can expose you to the chemical Nickel (metallic), known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. |
||
Installation Instructions | |||
Instrucciones de instalación |
|
Video de instalación |