Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Dimensions | |||
---|---|---|---|
Agujero (B1) |
11 mm |
Diámetro exterior OD |
25,4 mm (1,000 pulg) |
Penetración del eje máximo (B1) |
11,9 mm |
Tolerancia del agujero |
+0,03 mm / -0,00 mm |
Ancho del cubo (LH) |
11,85 mm |
Longitud L |
31,8 mm (1,250 pulg) |
Tolerancia del eje recomendada |
+0,000 mm / -0,013 mm |
||
Fastening Hardware | |||
Tornillo de abrazadera forjado |
M3 |
Número de tornillos |
1 cada |
Material del tornillo |
Series de acero inoxidable 18-8 300 |
Acabado de los tornillos |
Bright |
Par de apriete |
1,1 Nm |
Tamaño de la llave hexagonal |
2,5 mm |
Performance Specifications | |||
Torque Specifications |
Torque ratings vary with insert selection |
Desalineación angular |
0,5° |
Desalineación paralela |
0,008 pulg (0,20 mm) |
Máxima desalineación paralela |
0,100 pulg (2,54 mm) |
Movimiento axial |
0,004 pulg (0,10 mm) |
Momento de inercia |
3.685 x 10-6 kg-m2 |
Velocidad máxima |
4.500 RPM |
Recommended Inserts |
|
Bearing Support Required |
sí |
¿Juego cero? |
Sí |
¿Diseño equilibrado? |
Sí |
Mechanical Fuse |
Sí |
Additional Information | |||
UPC |
634529238806 |
País de origen |
EE.UU. |
Especificación de material |
Barra austenítica no magnética tipo AISI 303 |
Acabado |
Bright |
Especificación de acabado |
Bright, No Plating |
Fabricante |
Ruland Manufacturing |
Temperatura |
Acetal -23°C a 65°C |
peso |
0.038700 |
Tariff Code |
8483.60.8000 |
UNSPC |
31163015 |
Product Notes | |||
Nota 1 |
"Performance ratings are for guidance only. The user must determine suitability for a particular application." |
Nota 2 |
"Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. In some cases` especially when the smallest standard bores are used or where shafts are undersized` slippage on the shaft is possible below the rated torque of the disks. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance." |
Prop. 65 |
|
||