CPRS48-24-A CPFRG48/75-AT CPRSK48-20-A
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS
Dimensions | |||
---|---|---|---|
Agujero (B1) |
1,5000 pulg |
Agujero (B2) |
1,2500 pulg |
Chavetero (K1) |
NK |
Chavetero (K2) |
1/4 pulg |
Diámetro exterior OD |
75,0 mm (2,953 pulg) |
Longitud L |
57,0 mm (2,244 pulg) |
Espacio entre los cubos (LS) |
0,826 pulg (21,0 mm) |
Dimensions | |||
---|---|---|---|
Agujero (B1) |
1,5000 pulg |
Penetración del eje máximo (B1) |
1,102 pulg |
Diámetro exterior OD |
75,0 mm (2,953 pulg) |
Tolerancia del agujero |
+0,003 pulg / +0,001 pulg |
Ancho del cubo (LH) |
0,709 pulg |
Longitud L |
57,0 mm (2,244 pulg) |
Espacio entre los cubos (LS) |
0,826 pulg (21,0 mm) |
||
Fastening Hardware | |||
Tornillo de abrazadera forjado |
M8 |
Material del tornillo |
Alloy Steel |
Tamaño de la llave hexagonal |
6,0 mm |
Acabado de los tornillos |
Black Oxide |
Par de apriete |
24,0 Nm |
Ubicación del tornillo R |
25 mm |
Número de tornillos |
1 cada |
||
Performance Specifications | |||
Par recomendado |
15 Nm |
Desalineación angular |
1,5° |
Pico del par de transmisión |
22 Nm |
Rigidez torsional |
10,50 Nm/Deg |
Movimiento axial |
0,059 pulg |
Desalineación paralela |
0,079 pulg |
Velocidad máxima |
7,500 RPM |
Recommended Inserts |
|
Bearing Support Required |
sí |
¿Juego cero? |
Sí |
¿Diseño equilibrado? |
Sí |
||
Additional Information | |||
peso |
0.170800 |
Temperatura |
-30°C a 80°C |
Especificación de material |
Barra de aluminio AISI 6082 |
Acabado |
Anodizado claro |
Especificación de acabado |
Clear Anodized |
Fabricante |
Schmidt Kupplung |
UPC |
634529223932 |
País de origen |
Alemania |
Tariff Code |
8483.60.8000 |
UNSPC |
31163022 |
Product Notes | |||
Nota 1 |
Stainless steel hubs are available upon request. |
Nota 2 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Nota 3 |
Torque ratings for the couplings are based on the physical limitations/failure point of the inserts. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the inserts. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance. |
Prop. 65 |
WARNING This product can expose you to chemicals including Ethylene Thiourea and Nickel (metallic), known to the State of California to cause cancer, and Ethylene Thiourea known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
Installation Instructions | |||
Video de instalación |
Instrucciones de instalación |
|
Dimensions | |||
---|---|---|---|
Inserto de controlflex F |
1,122 pulg(28.5 mm) |
Diámetro exterior OD |
75,0 mm (2,953 pulg) |
Performance Specifications | |||
Torque Specifications Hub |
Torque ratings vary with hub selection |
Misalignment Hub |
Misalignment ratings vary with hub selection |
Additional Information | |||
peso |
0.030400 |
Temperatura |
-30°C a 80°C |
Especificación de material |
Acetal |
Fabricante |
Schmidt Kupplung |
UPC |
634529223062 |
País de origen |
Alemania |
Tariff Code |
8483.60.8000 |
UNSPC |
31163022 |
Product Notes | |||
Nota 1 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Prop. 65 |
WARNING This product can expose you to the chemical Formaldehyde, known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. |
Installation Instructions | |||
Instrucciones de instalación |
|
Video de instalación |
Dimensions | |||
---|---|---|---|
Agujero (B1) |
1,2500 pulg |
Penetración del eje máximo (B1) |
1,102 pulg |
Chavetero (K) |
1/4 pulg |
Diámetro exterior OD |
75,0 mm (2,953 pulg) |
Tolerancia del agujero |
+0,003 pulg / +0,001 pulg |
Ancho del cubo (LH) |
0,709 pulg |
Longitud L |
57,0 mm (2,244 pulg) |
Espacio entre los cubos (LS) |
0,826 pulg (21,0 mm) |
Fastening Hardware | |||
Tornillo de abrazadera forjado |
M8 |
Material del tornillo |
Alloy Steel |
Tamaño de la llave hexagonal |
6,0 mm |
Acabado de los tornillos |
Black Oxide |
Par de apriete |
24,0 Nm |
Ubicación del tornillo R |
25 mm |
Número de tornillos |
1 cada |
||
Performance Specifications | |||
Par recomendado |
15 Nm |
Desalineación angular |
1,5° |
Pico del par de transmisión |
22 Nm |
Rigidez torsional |
10,50 Nm/Deg |
Movimiento axial |
0,059 pulg |
Desalineación paralela |
0,079 pulg |
Velocidad máxima |
7,500 RPM |
Recommended Inserts |
|
Bearing Support Required |
sí |
¿Juego cero? |
Sí |
¿Diseño equilibrado? |
Sí |
||
Additional Information | |||
peso |
0.211000 |
Temperatura |
-30°C a 80°C |
Especificación de material |
Barra de aluminio AISI 6082 |
Acabado |
Anodizado claro |
Especificación de acabado |
Clear Anodized |
Fabricante |
Schmidt Kupplung |
UPC |
634529224199 |
País de origen |
Alemania |
Tariff Code |
8483.60.8000 |
UNSPC |
31163022 |
Product Notes | |||
Nota 1 |
Stainless steel hubs are available upon request. |
Nota 2 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Nota 3 |
Torque ratings for the couplings are based on the physical limitations/failure point of the inserts. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the inserts. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance. |
Prop. 65 |
WARNING This product can expose you to chemicals including Ethylene Thiourea and Nickel (metallic), known to the State of California to cause cancer, and Ethylene Thiourea known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
Installation Instructions | |||
Video de instalación |
Instrucciones de instalación |
|