Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Dimensions | |||
---|---|---|---|
Agujero (B1) |
0,2500 pulg |
Agujero (B2) |
0,1875 pulg |
Penetración del eje máximo (B1) |
0,570 pulg |
Penetración del eje máximo (B2) |
0,570 pulg |
Diámetro exterior OD |
19,1 mm (0,750 pulg) |
Tolerancia del agujero |
+0,001 pulg / -0,000 pulg |
Longitud L |
1,355 pulg (34,4 mm) |
Tolerancia del Longitud |
+/- 0,030 pulg |
Ancho del cubo (LH) |
0,410 pulg |
Tolerancia del eje recomendada |
+0,0000 pulg / -0,0005 pulg |
Fastening Hardware | |||
Tornillo de abrazadera forjado |
M2,5 |
Material del tornillo |
Alloy Steel |
Tamaño de la llave hexagonal |
2,0 mm |
Acabado de los tornillos |
Black Oxide |
Par de apriete |
1,21 Nm |
Número de tornillos |
2 cada |
Peformance Specifications | |||
Reversión del par dinámico |
10 lb-pulg |
Desalineación angular |
3,0° |
Par dinámico sin reversión |
20 lb-pulg |
Desalineación paralela |
0,008 pulg |
Par estático |
40 lb-pulg |
Movimiento axial |
0,020 pulg |
Rigidez torsional |
87 lb-pulg/Deg |
Momento de inercia |
0.002457 lb-in2 |
Velocidad máxima |
10,000 RPM |
Bearing Support Required |
sí |
¿Juego cero? |
Sí |
¿Diseño equilibrado? |
Sí |
Additional Information | |||
Especificación de material |
Cubos: Barra de aluminio 2024-T351 |
Temperatura |
-40°C a 93°C |
Especificación de acabado |
Anodizado con Sulfúrico MIL-A-8625 Tipo II, Clase 2 y ASTM B580 Tipo B Anodizado Negro |
Bellows Attachment Method |
Epoxy |
Fabricante |
Ruland Manufacturing |
País de origen |
EE.UU. |
peso |
0.032178 |
UPC |
63452941631 |
Tariff Code |
8483.60.8000 |
UNSPC |
31163018 |
Product Notes | |||
Nota 1 |
Stainless steel hubs are available upon request. |
Nota 2 |
Torque ratings are at maximum misalignment. |
Nota 3 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Nota 4 |
Torque ratings for the couplings are based on the physical limitations/failure point of the metal bellows. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the metal bellows. In some cases especially when the smallest standard bores are used or where shafts are undersized slippage on the shaft is possible below the rated torque of the metal bellows. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance. |