Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team

Währung
EUR - Euro
MENU

Carefully Made Shaft Collars

Shop
Konto
Einstellungen
  • Sprache:
    Deutsch
    • Währung
    EUR - Euro

    MSP-7-P

    12,73 €
    Artikeldetails Datenblatt
    Merken
    Email
    Menge Preis (USD)
    1 12,73 €
    50 11,57 €
    100 9,64 €
    250 8,67 €
    500 Angebot anfordern
    Auf Lager
    Registered users receive a 5% discount
    Ruland MSP-7-P, 7mm Two-Piece Shaft Collar, Plastic, Clamp Style, 18mm OD, 9mm Width
    main product photo

    Ähnliche Produkte

    PRODUKTSPEZIFIKATIONEN

    Ruland MSP-7-P is a two-piece shaft collar with a 7mm bore, 18mm OD, and 9mm width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of Ruland shaft collars, TIR of ≤ 05mm. Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MSP-7-P is stamped with the Ruland name and bore size for ease of identification. Halves are mated throughout the manufacturing process for proper fit and alignment. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. MSP-7-P is manufactured from solid bar stock sourced from select North American mills and machined to a fine burr free finish. Ruland uses engineered acetal plastic for a consistent finish. MSP-7-P is RoHS3 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

    PRODUKTSPEZIFIKATIONEN

    Abmessungen

    Bohrung (B1)

    7 mm

    Bohrungstoleranz

    +0,050 mm / +0,012 mm

    Außendurchmesser (OD)

    18 mm

    Platzbedarf C MAX

    22,4 mm

    Breite (W)

    9 mm

    Breitentoleranz

    +0,076 mm / -0,254 mm

    Empfohlenes Spaltmaß

    1,20 mm

    Empfohlene Wellentoleranz

    +0,000 mm / -0,013 mm
    Befestigungsschraube

    Innensechskantschraube

    M3 x 8

    Schraubenwerkstoff

    18-8 Cr-Ni Rostfreier Stahl

    Größe Sechskantschlüssel

    2,5 mm

    Schraubenoberfläche

    Glänzend Poliert

    Anzugsmoment

    0,2 Nm

    Schraubenposition (R)

    6,50 mm

    Anzahl der Schrauben

    je 2
    zusätzliche Information

    Materialspezifikation

    POM Stangenmaterial

    Spezifikation Oberflächenbehandlung

    Poliert

    Hersteller

    Ruland Manufacturing

    Herkunftsland

    USA

    Temperaturbereich

    -23°C bis 85°C

    Gewicht (kg)

    0.008100

    UPC

    634529314883

    Tariff Code

    8483.60.8000

    UNSPC

    31162811
    Produkthinweise

    Anmerkung 1

    Performance ratings are for guidance only. The user must determine suitability for a particular application.

    Prop 65

    WARNING This product can expose you to chemicals including Nickel (metallic) and Formaldehyde, known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

    Installationsanleitung

    1. Use the MSP-7-P two-piece shaft collar as it is received.
    2. Wipe the bore clean.
    3. Apply a thin coat of light oil to the shaft.
    4. Place the collar onto the desired shaft location with the groove side as the work surface. Tighten the collar using a 2.5 mm hex wrench until a slight resistance is felt.
    5. Be sure to maintain the gap of 1.20 mm between the two halves of the collar during installation.
    6. Wring collar into its final position and tighten the screw to the full recommended seating torque of 0.2 Nm using a 2.5 mm torque wrench.

    Verwandte Produkte

    MSP-7-P
    © 2024 Ruland Manufacturing Co., Inc. Alle Rechte vorbehalten.