Kostenfreier Versand
Kostenfreier UPS Standardversand für internationale Bestellungen über $399.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Abmessungen | |||
---|---|---|---|
Bohrung (B1) |
6/5.5D mm |
Abflachung (F) |
5,50 mm |
Flat Tolerance |
+.002”/-.000” |
Außendurchmesser (OD) |
12,7 mm (0,500 zoll) |
Max. Nabentiefe (B1) |
0,222 zoll |
Bohrungstoleranz |
+0,001 zoll / -0,000 zoll |
Nabenbreite (LH) |
0,222 zoll |
Länge (L) |
15,9 mm (0,625 zoll) |
Empfohlene Wellentoleranz |
+0,000 mm / -0,013 mm |
||
Befestigungsschraube | |||
Gewindestift mit Innensechskant |
M3 |
Anzahl der Schrauben |
je 1 |
Schraubenwerkstoff |
Legierter Stahl |
Schraubenoberfläche |
Brüniert |
Anzugsmoment |
0,92 Nm |
Größe Sechskantschlüssel |
1,5 mm |
Leistungsbeschreibungen | |||
Torque Specifications |
Torque ratings vary with insert selection |
Winkelversatz |
0,5° |
Paralellversatz |
0,004 zoll (0,10 mm) |
Max Paralellversatz |
0,050 zoll (1,27 mm) |
Axialbewegung |
0,004 zoll (0,10 mm) |
Trägheitsmoment |
0.255 x 10-7 kg-m2 |
Maximale Geschwindigkeit |
4.500 U/min |
Recommended Inserts |
|
Bearing Support Required |
Ja |
spielfrei? |
Ja |
Mechanical Fuse |
Ja |
||
zusätzliche Information | |||
UPC |
65432942067 |
Herkunftsland |
USA |
Materialspezifikation |
3.1355 (AlCuMg2) Aluminium |
Oberflächenverarbeitung |
Schwarz eloxiert |
Spezifikation Oberflächenbehandlung |
Schwarz eloxiert nach MIL-A-8625 Type II, Class 2 und ASTM B580 Type B |
Hersteller |
Ruland Manufacturing |
Temperaturbereich |
Acetal -23°C bis 65°C |
Gewicht (kg) |
0.003768 |
Tariff Code |
8483.60.8000 |
UNSPC |
31163015 |
Produkthinweise | |||
Anmerkung 1 |
"Performance ratings are for guidance only. The user must determine suitability for a particular application." |
Anmerkung 2 |
"Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. In some cases` especially when the smallest standard bores are used or where shafts are undersized` slippage on the shaft is possible below the rated torque of the disks. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance." |