Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
| Abmessungen | |||
|---|---|---|---|
|
Bohrung (B1) |
0,8750 zoll |
Bohrung (B2) |
0,8750 zoll |
|
B1 Min. Nabentiefe |
0,750 zoll |
B2 Min. Nabentiefe |
0,750 zoll |
|
Max. Nabentiefe (B1) |
1,650 zoll |
Max. Nabentiefe (B2) |
1,650 zoll |
|
Außendurchmesser (OD) |
2,750 zoll (69,9 mm) |
Bohrungstoleranz |
+0,001 zoll / -0,000 zoll |
|
Länge (L) |
3,531 zoll (89,7 mm) |
Nabenbreite (LH) |
1,200 zoll |
|
Empfohlene Wellentoleranz |
+0,0000 zoll / -0,0005 zoll |
||
| Befestigungsschraube | |||
|
Innensechskantschraube |
M8 |
Schraubenwerkstoff |
Legierter Stahl |
|
Größe Sechskantschlüssel |
6,0 mm |
Schraubenoberfläche |
Brüniert |
|
Anzugsmoment |
39 Nm |
Anzahl der Schrauben |
je 2 |
| Leistungsbeschreibungen | |||
|
Dynamisches Drehmoment Umkehrend |
212,5 lb-zoll |
Winkelversatz |
2,0° |
|
Dynamisches Drehmoment Nichtumkehrend |
425 lb-zoll |
Paralellversatz |
0,012 zoll |
|
Statisches Drehmoment |
850 lb-zoll |
Axialbewegung |
0,030 zoll |
|
Torsionssteife |
1600 lb-zoll/Deg |
Trägheitsmoment |
1.692 lb-in2 |
|
Maximale Geschwindigkeit |
10.000 U/min |
Bearing Support Required |
Ja |
|
spielfrei? |
Ja |
Ausgewogenes Design? |
Ja |
| Recommended Installation Tools | |||
|
Recommended Torque Wrench |
Recommended Hex Key |
||
| zusätzliche Information | |||
|
Materialspezifikation |
Naben aus 2024-T351 Aluminium Stangenmaterial, Federscheiben aus AIS 302 / 1.4310 Rostfreiem Stahl, Zentralstück aus POM |
Temperaturbereich |
-40°C bis 93°C |
|
Spezifikation Oberflächenbehandlung |
Schwarz eloxiert nach MIL-A-8625 Type II, Class 2 und ASTM B580 Type B |
Hersteller |
Ruland Manufacturing |
|
Herkunftsland |
USA |
Gewicht (kg) |
1.582410 |
|
UPC |
65432939094 |
Tariff Code |
8483.60.8000 |
|
UNSPC |
31163008 |
||
| Produkthinweise | |||
|
Anmerkung 1 |
Stainless steel hubs are available upon request. |
Anmerkung 2 |
Torque ratings are at maximum misalignment. |
|
Anmerkung 3 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Anmerkung 4 |
Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance. |
|
Prop 65 |
|
||
WARNING This product can expose you to chemicals including Ethylene Thiourea and Nickel (metallic), known to the State of California to cause cancer, and Ethylene Thiourea known to the State of California to cause birth defects or other reproductive harm. For more information go to 
