Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team

CPTDK16-6-A CPFRG16/25-AT CPTD16-6-A

Auf Lager
Ruland CPTDK16-6-A CPFRG16/25-AT CPTD16-6-A, 0.375" x 0.375" Controlflexkupplungspaket, Aluminium, Klemmnaben, 0.984" außendurchmesserm, 1.024" länge

PRODUKTSPEZIFIKATIONEN

Dieses Ruland-Controlflex kupplungspaket enthält CPTDK16-6-A, CPFRG16/25-AT und CPTD16-6-A. Um eine vollständige Baugruppe zu erhalten, müssen Sie zwei Naben und zwei funktionselement. Alle Teile haben einen Außendurchmesser von 0.984 zoll / 25.0mm und eine Gesamtlänge von 1.024 zoll / 26.0mm. CPTDK16-6-A ist eine Klemmnabe mit einer 0.375 zoll bohrung und 3/32 zoll passfedernut. CPTD16-6-A ist eine Klemmnabe mit einer 0.375 zoll bohrung. CPFRG16/25-AT ist eine acetal funktionselement. Es ist leichte Kupplung mit geringer Trägheit, die Geschwindigkeiten von bis zu 22.000 U / min ermöglicht. Dieses vierteilige Design ermöglicht eine hochgradig anpassbare Kupplung, die das einfache Kombinieren von Naben mit zölligen- oder metrischen Bohrungen mit und ohne Paßfedernut erlaubt. Alle Schrauben sind metrisch und entsprechen DIN 912 12.9 für maximale Drehmomente. Controlflex-Kupplungen haben ein gewuchtetes Design für reduzierte Vibrationen bei hohen Geschwindigkeiten, können alle Arten von Ausrichtungsfehlern kompensieren und eignen sich hervorragend für Encoder, Tachometer und leichte Servo-Positionieranwendungen. Alle Komponenten dieses Paketes sind RoHS3- und REACH-konform.

PRODUKTSPEZIFIKATIONEN

Abmessungen

Bohrung (B1)

0,3750 zoll

Bohrung (B2)

0,3750 zoll

Passfedernut (K1)

3/32 zoll

Passfedernut (K2)

NK

Außendurchmesser (OD)

25,0 mm (0,984 zoll)

Länge (L)

26,0 mm (1,024 zoll)

Abstand zwischen den Naben (LS)

0,472 zoll (12,0 mm)

Abmessungen

Bohrung (B1)

0,3750 zoll

Max. Nabentiefe (B1)

0,492 zoll

Passfedernut (K)

3/32 zoll

Außendurchmesser (OD)

25,0 mm (0,984 zoll)

Bohrungstoleranz

+0,002 zoll / +0,001 zoll

Nabenbreite (LH)

0,276 zoll

Länge (L)

1,024 zoll

Abstand zwischen den Naben (LS)

0,472 zoll (12,0 mm)

Befestigungsschraube

Innensechskantschraube

M2,5

Schraubenwerkstoff

Legierter Stahl

Größe Sechskantschlüssel

2,0 mm

Schraubenoberfläche

Brüniert

Anzugsmoment

0,7 Nm

Schraubenposition (R)

8 mm

Anzahl der Schrauben

je 1

Leistungsbeschreibungen

Nenndrehmoment

1,4 Nm

Winkelversatz

1,0°

Spitzen Drehmoment

2 Nm

Torsionssteife

1,30 Nm/Deg

Axialbewegung

0,020 zoll

Paralellversatz

0,028 zoll

Maximale Geschwindigkeit

22.000 U/min

Recommended Inserts

CPFRG16/25-AT

Bearing Support Required

Ja

spielfrei?

Ja

Ausgewogenes Design?

Ja

zusätzliche Information

Gewicht (kg)

0.008200

Temperaturbereich

-30°C bis 80°C

Materialspezifikation

6082 Aluminium Stangenmaterial

Oberflächenverarbeitung

Klar eloxiert

Spezifikation Oberflächenbehandlung

Klar eloxiert

Hersteller

Schmidt Kupplung

UPC

634529224427

Herkunftsland

Deutschland

Tariff Code

8483.60.8000

UNSPC

31163022

Produkthinweise

Anmerkung 1

Edelstahlnaben auf Anfrage erhältlich

Anmerkung 2

Leistungsdaten stellen keine Garantie dar, sondern liefern Hilfe für eigene Tests und Auswertungen für spezielle Anwendungen.

Anmerkung 3

Die Drehmomentangaben basieren auf den Versagedrehmomenten der Funktionselement. Unter normalen/typischen Bedingungen können die Naben diesen Drehmoment sicher übertragen. In Sonderfällen, wenn z.B. die kleinste angebotene Nabenbohrung verwendet wird oder die Welle nicht passgenau ist, ist Wellenschlupf auch unterhalb des maximalen Drehmoments möglich. Zur besseren Befestigung der Naben auf der Welle, sind Passfedernuten auf Anfrage erhältlich. Bitte kontaktieren sie uns zur weiteren Beratung.

Prop 65

WARNING This product can expose you to chemicals including Ethylene Thiourea and Nickel (metallic), known to the State of California to cause cancer, and Ethylene Thiourea known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Installationsanleitung

Installationsvideos

Installationsanleitung

  1. Align the bores of the CPTDK16-6-A controlflex coupling hub on the shafts that are to be joined with the drive pins facing each other and determine if the misalignment parameters are within the limits of the coupling. (Angular Misialignment: 1.0°, Parallel Misalignment: 0.7 mm, Axial Motion: 0.5 mm)
  2. Rotate the hubs on the shaft so the drive pins are 90° from each other.
  3. Place the first hub at the end of the shaft. Tighten the clamp screw to 0.7 Nm using a 2.0 mm hex torque wrench.
  4. Place an insert(s) with the standoffs facing the hub over the pins of the hub that was just installed.
  5. Align the drive pins on the second hub to match the holes in the insert(s).
  6. Verify that the space between hubs is 0.472 in, 12.0 mm.
  7. Tighten the clamp screw on the second hub to the recommended seating torque of 0.7 Nm using a 2.0 mm hex torque wrench.

Abmessungen

Frog Bore F

0,315 zoll (8 mm)

Außendurchmesser (OD)

25,0 mm (0,984 zoll)

Leistungsbeschreibungen

Torque Specifications Hub

Torque ratings vary with hub selection

Misalignment Hub

Misalignment ratings vary with hub selection

zusätzliche Information

Gewicht (kg)

0.001100

Temperaturbereich

-30°C bis 80°C

Materialspezifikation

Acetal

Hersteller

Schmidt Kupplung

UPC

634529223031

Herkunftsland

Deutschland

Tariff Code

8483.60.8000

UNSPC

31163022

Produkthinweise

Anmerkung 1

Leistungsdaten stellen keine Garantie dar, sondern liefern Hilfe für eigene Tests und Auswertungen für spezielle Anwendungen.

Prop 65

WARNING This product can expose you to the chemical Formaldehyde, known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Installationsanleitung

Installationsanleitung

  1. Align the bores of the controlflex coupling hubs on the shafts that are to be joined and determine if the misalignment parameters are within the limits of the coupling. (Select Hub for misalignment parameters.)
  2. Rotate the hubs on the shaft so the drive pins are 90° from each other.
  3. Place one hub at the end of the shaft. Tighten the clamp screw to the recommended seating torque.
  4. Place an insert(s) with the standoffs facing the hub over the pins of the hub that was just installed.
  5. Align the drive pins on the second hub to match the holes in the insert(s).

Installationsvideos

Abmessungen

Bohrung (B1)

0,3750 zoll

Max. Nabentiefe (B1)

0,492 zoll

Außendurchmesser (OD)

25,0 mm (0,984 zoll)

Bohrungstoleranz

+0,002 zoll / +0,001 zoll

Nabenbreite (LH)

0,276 zoll

Länge (L)

1,024 zoll

Abstand zwischen den Naben (LS)

0,472 zoll (12,0 mm)

Befestigungsschraube

Innensechskantschraube

M2,5

Schraubenwerkstoff

Legierter Stahl

Größe Sechskantschlüssel

2,0 mm

Schraubenoberfläche

Brüniert

Anzugsmoment

0,7 Nm

Schraubenposition (R)

8 mm

Anzahl der Schrauben

je 1

Leistungsbeschreibungen

Nenndrehmoment

1,4 Nm

Winkelversatz

1,0°

Spitzen Drehmoment

2 Nm

Torsionssteife

1,30 Nm/Deg

Axialbewegung

0,020 zoll

Paralellversatz

0,028 zoll

Maximale Geschwindigkeit

22.000 U/min

Recommended Inserts

CPFRG16/25-AT

Bearing Support Required

Ja

spielfrei?

Ja

Ausgewogenes Design?

Ja

zusätzliche Information

Gewicht (kg)

0.008200

Temperaturbereich

-30°C bis 80°C

Materialspezifikation

6082 Aluminium Stangenmaterial

Oberflächenverarbeitung

Klar eloxiert

Spezifikation Oberflächenbehandlung

Klar eloxiert

Hersteller

Schmidt Kupplung

UPC

634529224250

Herkunftsland

Deutschland

Tariff Code

8483.60.8000

UNSPC

31163022

Produkthinweise

Anmerkung 1

Edelstahlnaben auf Anfrage erhältlich

Anmerkung 2

Leistungsdaten stellen keine Garantie dar, sondern liefern Hilfe für eigene Tests und Auswertungen für spezielle Anwendungen.

Anmerkung 3

Die Drehmomentangaben basieren auf den Versagedrehmomenten der Funktionselement. Unter normalen/typischen Bedingungen können die Naben diesen Drehmoment sicher übertragen. In Sonderfällen, wenn z.B. die kleinste angebotene Nabenbohrung verwendet wird oder die Welle nicht passgenau ist, ist Wellenschlupf auch unterhalb des maximalen Drehmoments möglich. Zur besseren Befestigung der Naben auf der Welle, sind Passfedernuten auf Anfrage erhältlich. Bitte kontaktieren sie uns zur weiteren Beratung.

Prop 65

WARNING This product can expose you to chemicals including Ethylene Thiourea and Nickel (metallic), known to the State of California to cause cancer, and Ethylene Thiourea known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Installationsanleitung

Installationsvideos

Installationsanleitung

  1. Align the bores of the CPTD16-6-A controlflex coupling hub on the shafts that are to be joined with the drive pins facing each other and determine if the misalignment parameters are within the limits of the coupling. (Angular Misialignment: 1.0°, Parallel Misalignment: 0.7 mm, Axial Motion: 0.5 mm)
  2. Rotate the hubs on the shaft so the drive pins are 90° from each other.
  3. Place the first hub at the end of the shaft. Tighten the clamp screw to 0.7 Nm using a 2.0 mm hex torque wrench.
  4. Place an insert(s) with the standoffs facing the hub over the pins of the hub that was just installed.
  5. Align the drive pins on the second hub to match the holes in the insert(s).
  6. Verify that the space between hubs is 0.472 in, 12.0 mm.
  7. Tighten the clamp screw on the second hub to the recommended seating torque of 0.7 Nm using a 2.0 mm hex torque wrench.

CPTDK16-6-A CPFRG16/25-AT CPTD16-6-A
© 2024 Ruland Manufacturing Co., Inc. Alle Rechte vorbehalten.