Kostenfreier Versand
Kostenfreier UPS Standardversand für internationale Bestellungen über $399.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Abmessungen | |||
---|---|---|---|
Bohrung (B1) |
0,6250 zoll |
Bohrung (B2) |
0,5000 zoll |
Max. Nabentiefe (B1) |
1,496 zoll |
Max. Nabentiefe (B2) |
1,496 zoll |
Außendurchmesser (OD) |
57,2 mm (2,250 zoll) |
Bohrungstoleranz |
+0.004 zoll / +0.001 zoll |
Länge (L) |
3,235 zoll (82,2 mm) |
Längetoleranz |
+/- 0,030 zoll |
Nabenbreite (LH) |
1,050 zoll |
Empfohlene Wellentoleranz |
+0,0000 zoll / -0,0005 zoll |
Befestigungsschraube | |||
Innensechskantschraube |
M6 |
Schraubenwerkstoff |
Legierter Stahl |
Größe Sechskantschlüssel |
5,0 mm |
Schraubenoberfläche |
Brüniert |
Anzugsmoment |
16 Nm |
Anzahl der Schrauben |
je 2 |
Peformance Specifications | |||
Dynamisches Drehmoment Umkehrend |
132 lb-zoll |
Winkelversatz |
2,0° |
Dynamisches Drehmoment Nichtumkehrend |
265 lb-zoll |
Paralellversatz |
0,012 zoll |
Statisches Drehmoment |
530 lb-zoll |
Axialbewegung |
0,030 zoll |
Torsionssteife |
1200 lb-zoll/Deg |
Trägheitsmoment |
0.585538 lb-in2 |
Maximale Geschwindigkeit |
10.000 U/min |
Bearing Support Required |
Ja |
spielfrei? |
Ja |
Ausgewogenes Design? |
Ja |
Recommended Installation Tools | |||
Recommended Torque Wrench |
Recommended Hex Key |
||
zusätzliche Information | |||
Materialspezifikation |
Naben aus 2024-T351 Aluminium Stangenmaterial, Balge aus AISI 321 / 1-4541 Rostfreiem Stahl |
Temperaturbereich |
-40°C bis 93°C |
Spezifikation Oberflächenbehandlung |
Schwarz eloxiert nach MIL-A-8625 Type II, Class 2 und ASTM B580 Type B |
Bellows Attachment Method |
Epoxid |
Hersteller |
Ruland Manufacturing |
Herkunftsland |
USA |
Gewicht (kg) |
0.836800 |
UPC |
634529307021 |
Tariff Code |
8483.60.8000 |
UNSPC |
31163018 |
Produkthinweise | |||
Anmerkung 1 |
Stainless steel hubs are available upon request. |
Anmerkung 2 |
Torque ratings are at maximum misalignment. |
Anmerkung 3 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Anmerkung 4 |
Torque ratings for the couplings are based on the physical limitations/failure point of the metal bellows. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the metal bellows. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the metal bellows. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance. |