TCL-3-32-F
$7.51
ea
Ruland TCL-3-32-F, #10 - 32 TPI Threaded Shaft Collar, Black Oxide Steel, One-Piece Clamp Style, 5/8" OD, 0.281" Width
PRODUCT SPECIFICATIONS
Ruland TCL-3-32-F is a threaded one-piece shaft collar with a #10 - 32 TPI bore, 5/8" OD, and 0.281" width. TCL-3-32-F has higher axial holding power than round bore shaft collars of similar size. Ruland double taps threads to ensure a precise and burr-free finish allowing for easy installation and removal, proper fit, and extended shaft life. The clamp style design will not mar the shaft. TCL-3-32-F is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002"). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. TCL-3-32-F is stamped with the Ruland name and bore size for ease of identification. Forged screws test beyond ANSI standards to ensure maximum holding power. It is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 1215 lead-free steel with a proprietary black oxide finish that produces a fine glossy finish while increasing holding power and resisting corrosion. TCL-3-32-F is RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
| Dimensions | |||
|---|---|---|---|
Threaded Bore B |
#10 - 32 TPI |
Outer Diameter OD |
5/8 in |
Width W |
0.281 in |
Clearance Diameter C MAX |
0.773 in |
Width Tolerance |
+.003 in / -.010 in |
||
| Fastening Hardware | |||
Forged Clamp Screw |
#4-40 |
Screw Material |
Alloy Steel |
Hex Wrench Size |
3/32 in |
Screw Finish |
Black Oxide |
Seating Torque |
15 lb-in |
Screw Location R |
0.210 in |
Number of Screws |
1 ea |
||
| Additional Information | |||
Material Specification |
1215 Carbon Steel Bar |
Temperature |
-40°F to 350°F |
Finish Specification |
Hot Process Black Oxide, Impregnated with Naphthenic Oil, Centrifugally Dried |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Weight (lbs.) |
0.0200 |
UPC |
63452902832 |
||
