SPH-74-SS
$1,575.99
ea
Ruland SPH-74-SS, 4 5/8" Heavy Duty Shaft Collar, 303 Stainless Steel, Two-Piece Clamp Style, 6 1/2" OD, 1.375" Width
PRODUCT SPECIFICATIONS
Ruland SPH-74-SS is a two-piece shaft collar with a 4 5/8" bore, 6 1/2" OD, and 1.375" width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. SPH-74-SS is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002"). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. SPH-74-SS is stamped with the Ruland name and bore size for ease of identification. This heavy duty shaft collars have larger ODs and screws for higher holding power. Halves are mated throughout the manufacturing process for proper fit and alignment. Forged screws test beyond ANSI standards to ensure maximum holding power. SPH-74-SS is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 303 stainless steel with hardware of like material for consistent corrosion resistance. Stainless steel hardware undergoes a proprietary surface treatment process to prevent galling. It is RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
| Dimension | |||
|---|---|---|---|
Bore B |
4.6250 in |
Bore Tolerance |
+.004 in / -.000 in |
Outer Diameter OD |
6 1/2 in |
Clearance Diameter C MAX |
6.782 in |
Width W |
1.375 in |
Width Tolerance |
+.003 in / -.010 in |
| Fastening Hardware | |||
Forged Clamp Screw |
1/2-20x2 |
Screw Material |
18-8 300 Series Stainless Steel |
Hex Wrench Size |
3/8 in |
Screw Finish |
Bright |
Seating Torque |
800 lb-in |
Screw Location R |
2.813 in |
Number of Screws |
2 ea |
||
| Additional Information | |||
Material Specification |
Type 303 Austenitic, Non-Magnetic Bar |
Finish Specification |
Bright |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Temperature |
-40°F to 350°F |
Weight (lbs.) |
6.4000 |
