$224.97 ea
Quantity Price (USD)
1 $224.97 ea
5 $134.98 ea
15 $112.49 ea
50 $101.24 ea
100 Request Quote
In stock
Registered users receive a 5% discount
Only 10 left
Ruland SPH-49-F, 3 1/16" Heavy Duty Shaft Collar, Black Oxide Steel, Two-Piece Clamp Style, 5" OD, 1.375" Width


Ruland SPH-49-F is a two-piece shaft collar with a 3 1/16" bore, 5" OD, and 1.375" width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. SPH-49-F is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002"). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. SPH-49-F is stamped with the Ruland name and bore size for ease of identification. This heavy duty shaft collars have larger ODs and screws for higher holding power. Halves are mated throughout the manufacturing process for proper fit and alignment. Forged screws test beyond ANSI standards to ensure maximum holding power. SPH-49-F is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 1215 lead-free steel with a proprietary black oxide finish that produces a fine glossy finish while increasing holding power and resisting corrosion. It is RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.



Bore B

3.0625 in

Bore Tolerance

+.004 in / -.000 in

Outer Diameter OD

5 in

Clearance Diameter C MAX

5.397 in

Width W

1.375 in

Width Tolerance

+.003 in / -.010 in

Fastening Hardware

Forged Clamp Screw

1/2-20 x 1 3/4

Screw Material

Alloy Steel

Hex Wrench Size

3/8 in

Screw Finish

Black Oxide

Seating Torque

1612 lb-in

Screw Location R

2.063 in

Number of Screws

2 ea

Additional Information

Material Specification

1215 Bar or A519 Hot Finished 1026 Carbon Steel

Finish Specification

Hot Process Black Oxide, Impregnated with Naphthenic Oil, Centrifugally Dried


Ruland Manufacturing

Country of Origin



-40°F to 350°F
-40°C to 176°C

Weight (lbs.)




Product Notes

Note 1

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Prop 65

WARNING This product can expose you to the chemical Ethylene Thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

ISO 9001:2015


Conflict Minerals






We found other products you might like!


© 2019 Ruland Manufacturing Co., Inc. All rights reserved