Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team

SPC-10-8-F

$141.48
Quantity Price (USD)
1 $141.48
10 $128.62
40 $107.19
100 $96.47
250 Request Quote
In stock
Registered users receive a 5% discount

Ruland SPC-10-8-F, 5/8" x 1/2" Rigid Coupling, Black Oxide Steel, Two-Piece Clamp Style With Keyway, 1 5/16" OD, 2" Length

Explore Similar Products

PRODUCT SPECIFICATIONS

Ruland SPC-10-8-F is a two-piece rigid coupling with 0.6250" x 0.5000" bores, 1 5/16" OD, 2" length, and 3/16" x 3/16" keyways. SPC-10-8-F has opposing hardware for a balanced design. Proprietary Nypatch® anti-vibration coating on hardware allows for even seating of the screw, repeated screw installations, prevents galling, and maintains high holding power. It eliminates the need to treat screws upon receipt greatly reducing installation time. Forged screws test beyond ANSI standards to ensure maximum holding power. Tightly controlled bore tolerance of +.002"/+.0005" is maintained. SPC-10-8-F is made from 1215 lead-free steel with a proprietary black oxide finish that produces a fine glossy finish while increasing holding power and resisting corrosion. It is machined from solid bar stock that is sourced exclusively from North American mills and is RoHS3 and REACH compliant. SPC-10-8-F is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

PRODUCT SPECIFICATIONS

Dimensions

Bore (B1) Larger inner diameter. Should match nominal shaft diameter.

0.6250 in

Small Bore (B2) Smaller inner diameter. Should match nominal shaft diameter.

0.5000 in

Keyway (K1)

3/16 in

Keyway (K2)

1/8 in

B1 Max Shaft Penetration The maximum depth the shaft can penetrate into Bore B1.

1.000 in

B2 Max Shaft Penetration The maximum depth the shaft can penetrate into Bore B2.

1.000 in

Outer Diameter (OD)

1 5/16 in

Bore Tolerance Variance in finished bore range before installation.

+0.0020 in / +0.0005 in

Length (L)

2 in

Clearance Diameter (C) MAX Minimum diameter required to avoid interference with hardware.

1.514 in

Recommended Gap The recommended gap between halves to maintain during installation. See installation instructions for more information.

0.063 in

Recommended Shaft Tolerance Acceptable variance in nominal shaft diameter before performance loss.

+0.0000 in / -0.0005 in

Fastening Hardware

Forged Clamp Screw Inch or metric socket head cap screw size.

#10-32

Screw Material

Alloy Steel with Nypatch®

Hex Wrench Size Wrench size that fits the screw head to tighten or loosen the screw.

5/32 in

Screw Finish Surface finish and treatments on supplied hardware.

Black Oxide

Seating Torque Torque required to install supplied hardware. Use torque wrench for accurate seating torque.

76 lb-in

Screw Location (R)

0.484 in

Number of Screws

8 ea

Performance Specifications

Rated Torque Keyed Rigids have an increased torque capability beyond the Rated Torque. The max torque becomes based on the physical limitations of the key that is used.

1600 in-lb

Moment of Inertia

0.1404 lb-in2

Maximum Speed

4,000 RPM

Full Bearing Support Required? Full bearing support is a bearing in close proximity to both sides of the coupling to prevent axial loads that could result in rapid coupling failure.

No

Nypatch® Anti-Vibration Hardware? This proprietary coating allows for repeated installations, prevents screws from coming loose during operation, and provides the necessary dissimilar material in stainless steel couplings to reduce galling.

Yes

Zero-Backlash? Zero-backlash ensures there is no loss of motion during operation.

Yes

Balanced Design The balanced design allows for reduced vibration at high RPMs.

Yes

Additional Information

Material Specification

1215 Carbon Steel Bar

Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...

-40°F to 350°F (-40°C to 176°C)

Finish Specification Surface finish specifications.

Hot Process Black Oxide, Impregnated with Naphthenic Oil, Centrifugally Dried

Manufacturer

Ruland Manufacturing

Country of Origin

USA

Weight (lbs)

0.548200

UPC

634529022221

Tariff Code

8483.60.8000

UNSPC Code used to identify products to standardize nomenclature around the world.

31163009

Product Notes

Note 1

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Prop 65 Required for the US State of California only.

WARNING This product can expose you to the chemical Ethylene Thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CERTIFICATIONS/STANDARDS
ISO 9001:2015

Certified

Conflict Minerals

Compliant

RoHS3

Compliant

REACH

Compliant

Installation Instructions

  1. Align the SPC-10-8-F two-piece rigid coupling on the two shafts to be connected. There should be no misalignment.
  2. Tighten the Nypatch® screws in two stages, starting with the inside screws. Using a 5/32 in torque wrench, tighten the inside screws to 38 lb-in which is half the recommended seating torque. Repeat the process for the outside screws, tightening to half the recommended seating torque.
  3. Be sure to maintain the gap of 0.063 in between the two halves during installation.
  4. Tighten the screws to the full recommended seating torque of 76 lb-in following the same pattern, starting with the inside screws first.
  5. For optimum results do not exceed the shaft penetration length of 1.000 in.

CUSTOMER REVIEWS

SPC-10-8-F
© 2024 Ruland Manufacturing Co., Inc. All rights reserved