QCL-16-A
$41.76
ea
Ruland QCL-16-A, 1" Quick Clamping Shaft Collar, Aluminum, Quick Release, 1.969" OD, 0.512" Width
PRODUCT SPECIFICATIONS
Ruland QCL-16-A is a quick clamping shaft collar with 1" bore, 1.969" OD, and 0.512" width. No tools are required to install or remove allowing for quick installations and adjustments while reducing downtime. It is designed for light duty stationary or low rotating applications where frequent change outs of items including media, guide rails, or other setup fixturing is required. QCL-16-A has an integral handle that can be actuated using finger power only for easy postioning adjustments. The screw can be adjusted to be compatible with wider shaft tolerances and provide a range of axial holding power. Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. QCL-16-A is machined from bar stock that is sourced exclusively from North American mills. It is RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
| Dimensions | |||
|---|---|---|---|
Bore B |
1.0000 in |
Bore Tolerance |
+.002 in / +.0005 in |
Width W |
0.512 in |
Outer Diameter OD |
1.969 in |
Width Tolerance |
+.003 in / -.010 in |
||
| Fastening Hardware | |||
Cap Screw |
M3 |
Screw Material |
18-8 300 Series Stainless Steel |
Hex Wrench Size |
2.5 mm |
Screw Finish |
Bright |
Seating Torque |
Factory Preset: 3 in-lbs, Min: 2 in-lbs, Max: 5 in-lbs |
Number of Screws |
1 ea |
| Additional Information | |||
Material Specification |
Body: 6061-T651 Aluminum Bar, Handle: 6063-T651 Aluminum |
Temperature |
-40°F to 200°F |
Finish Specification |
Body: Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize, Handle: Sulfuric Anodized MIL-A-8625 Type II, Class 2 Gold Anodize with Teflon |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Weight (lbs.) |
0.1220 |
UPC |
63452912556 |
Axial Load |
Min: 70 lbs, Max: 100 lbs |
| Product Notes | |||
Note 1 |
Increasing or decreasing screw seating torque increases or decreases the axial load. Increasing torque will make it more difficult to open the handle. |
Note 2 |
The minimum and maximum axial load data are typical values under certain test conditions and are not a guarantee of average values nor a guarantee of maximum or minimum values under all conditions. Thrust values shown are FAILURE MODE. They are shown solely for the reader to utilize appropriate testing equipment to make his/her own evaluation, and are not intended by Ruland Manufacturing Company, Inc., as warranties, either express or implied, of fitness for a given purpose. |
Note 3 |
U.S. Patent No. USD629016S1 |
||
