MTCL-8-1.25-SS
$23.02
ea
Ruland MTCL-8-1.25-SS, M8 x 1.25 Threaded Shaft Collar, 303 Stainless Steel, One-Piece Clamp Style, 18mm OD, 9mm Width
PRODUCT SPECIFICATIONS
Ruland MTCL-8-1.25-SS is a threaded one-piece shaft collar with a M8 x 1.25 bore, 18mm OD, and 9mm width. It has higher axial holding power than round bore shaft collars of similar size. Ruland double taps threads to ensure a precise and burr-free finish allowing for easy installation and removal, proper fit, and extended shaft life. The clamp style design will not mar the shaft. MTCL-8-1.25-SS is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of Ruland shaft collars, TIR of ≤ 05mm. Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MTCL-8-1.25-SS is stamped with the Ruland name and bore size for ease of identification. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. It is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 303 stainless steel with hardware of like material for consistent corrosion resistance. Stainless steel hardware undergoes a proprietary surface treatment process to prevent galling. MTCL-8-1.25-SS is RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
| Dimensions | |||
|---|---|---|---|
Threaded Bore B |
M8 x 1.25 |
Outer Diameter OD |
18 mm |
Width W |
9 mm |
Clearance Diameter C MAX |
22.4 mm |
Width Tolerance |
+.076 mm / -.254 mm |
||
| Fastening Hardware | |||
Forged Clamp Screw |
M3x8 |
Screw Material |
18-8 300 Series Stainless Steel |
Hex Wrench Size |
2.5 mm |
Screw Finish |
Bright |
Seating Torque |
1.1 Nm |
Screw Location R |
6.50 mm |
Number of Screws |
1 ea |
||
| Additional Information | |||
Material Specification |
Type 303 Austenitic, Non-Magnetic Bar |
Temperature |
-40°F to 350°F |
Finish Specification |
Bright |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Weight (lbs.) |
0.0300 |
UPC |
63452904171 |
||
