MSP-36E-SS
Ruland MSP-36E-SS, 2 1/4" International Shaft Collar, 303 Stainless Steel, Two-Piece Clamp Style, 88mm OD, 19mm Width
Ruland MSP-36E-SS, 2 1/4" International Shaft Collar, 303 Stainless Steel, Two-Piece Clamp Style, 88mm OD, 19mm Width
Ruland MSP-36E-SS is a two-piece shaft collar with a 2 1/4" bore, 88mm OD, and 19mm width. It is an international series shaft collar that has metric hardware and dimensions with inch bores. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of Ruland shaft collars, TIR of ≤ 05mm. Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MSP-36E-SS is stamped with the Ruland name and bore size for ease of identification. Halves are mated throughout the manufacturing process for proper fit and alignment. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. MSP-36E-SS is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 303 stainless steel with hardware of like material for consistent corrosion resistance. Stainless steel hardware undergoes a proprietary surface treatment process to prevent galling. It is RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
Dimension | |||
---|---|---|---|
Bore B |
2.2500 in |
Bore Tolerance |
+.002 in / +.0005 in |
Outer Diameter OD |
88 mm |
Clearance Diameter C MAX |
94.0 mm |
Width W |
19 mm |
Width Tolerance |
+.076 mm / -.254 mm |
Fastening Hardware | |||
Forged Clamp Screw |
M8 |
Screw Material |
18-8 300 Series Stainless Steel |
Hex Wrench Size |
6.0 mm |
Screw Finish |
Bright |
Seating Torque |
23 Nm |
Screw Location R |
37.01 mm |
Number of Screws |
2 ea |
||
Additional Information | |||
Material Specification |
Type 303 Austenitic, Non-Magnetic Bar |
Finish Specification |
Bright |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Temperature |
-40°F to 350°F |
Weight (lbs.) |
1.0700 |
UPC |
63452911798 |
||
Product Notes | |||
Note 1 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Prop 65 |
|