MSP-13-FZ
$15.86
ea
Ruland MSP-13-FZ, 13mm Two-Piece Shaft Collar, Zinc Plated Steel, Clamp Style, 30mm OD, 11mm Width
PRODUCT SPECIFICATIONS
Ruland MSP-13-FZ is a two-piece shaft collar with a 13mm bore, 30mm OD, and 11mm width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. MSP-13-FZ is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of Ruland shaft collars, TIR of ≤ 05mm. Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MSP-13-FZ is stamped with the Ruland name and bore size for ease of identification. Halves are mated throughout the manufacturing process for proper fit and alignment. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. MSP-13-FZ is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 1215 lead-free steel with a zinc plated finish for added corrosion resistance. It is RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
| Dimension | |||
|---|---|---|---|
Bore B |
13 mm |
Bore Tolerance |
+.050 mm / +.012 mm |
Outer Diameter OD |
30 mm |
Clearance Diameter C MAX |
33.7 mm |
Width W |
11 mm |
Width Tolerance |
+.076 mm / -.254 mm |
| Fastening Hardware | |||
Forged Clamp Screw |
M4 x 14 |
Screw Material |
Alloy Steel |
Hex Wrench Size |
3.0 mm |
Screw Finish |
Zinc Plated |
Seating Torque |
4.6 Nm |
Screw Location R |
11.00 mm |
Number of Screws |
2 ea |
||
| Additional Information | |||
Material Specification |
1215 Carbon Steel Bar |
Finish Specification |
Type II, SC2 Zinc Plating with a Yellow "Trivalent" Chromate Conversion Coating, Meets or Exceeds ASTM B633-98 |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Temperature |
-40°F to 350°F |
Weight (lbs.) |
0.1100 |
UPC |
63452911717 |
||
| Product Notes | |||
Note 1 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
||
