Dimensions | |||
---|---|---|---|
Bore B |
19 mm |
Bore Tolerance |
+.03 mm / -.00 mm |
B1 Shaft Penetration |
18.0 mm |
Keyway K |
6 mm |
Outer Diameter OD |
41.3 mm |
Length L |
50.8 mm |
Hub Width LH |
18.0 mm |
||
Fastening Hardware | |||
Forged Clamp Screw |
M4 |
Number of Screws |
1 ea |
Screw Material |
Alloy Steel |
Screw Finish |
Black Oxide |
Seating Torque |
4.6 Nm |
Hex Wrench Size |
3.0 mm |
Performance Specifications | |||
Angular Misalignment |
0.5° |
Parallel Misalignment |
0.010 in, 0.25 mm |
Max Parallel Misalignment |
0.163 in, 4.13 mm |
Axial Motion |
0.006 in, 0.15 mm |
Maximum Speed |
4,500 RPM |
||
Additional Information | |||
UPC |
63452913418 |
Country of Origin |
USA |
Material Specification |
2024-T351 Aluminum Bar |
Finish |
Black Anodized |
Finish Specification |
Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize |
Manufacturer |
Ruland Manufacturing |
Temperature |
Acetal Disk -10°F to 150°F |
Weight (lbs.) |
0.1810 |
Product Notes | |||
Note 1 |
Stainless steel hubs are available upon request. |
Note 2 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Note 3 |
Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. Please consult technical support for more assistance. |
Prop 65 |
|