MOCC25-10-A OD16/25-NL MOCC25-9-A

  • MOCC25-10-A
    Quantity Price (USD)
    1 $38.07 ea
    20 $22.84 ea
    50 $19.04 ea
    100 $17.13 ea
    In Stock
  • OD16/25-NL
    Quantity Price (USD)
    1 $10.35 ea
    20 $6.21 ea
    50 $5.18 ea
    100 $4.66 ea
    In Stock
  • MOCC25-9-A
    Quantity Price (USD)
    1 $50.95 ea
    20 $38.21 ea
    50 $28.53 ea
    100 $17.13 ea
    In Stock
In stock
Ruland MOCC25-10-A OD16/25-NL MOCC25-9-A, 10mm x 9mm Oldham Coupling Bundle, Aluminum, Clamp Style Hubs, 1.000" (25.4mm) OD, 31.8mm Length

Dimensions

Bore B

10 mm

Bore Tolerance

+.03 mm / -.00 mm

B1 Shaft Penetration

11.9 mm

Keyway K

3 mm

Outer Diameter OD

25.4 mm

Length L

31.8 mm

Hub Width LH

11.9 mm

Fastening Hardware

Forged Clamp Screw

M3

Number of Screws

1 ea

Screw Material

Alloy Steel

Screw Finish

Black Oxide

Seating Torque

2.1 Nm

Hex Wrench Size

2.5 mm

Performance Specifications

Angular Misalignment

0.5°

Parallel Misalignment

0.008 in, 0.20 mm

Max Parallel Misalignment

0.100 in, 2.54 mm

Axial Motion

0.004 in, 0.10 mm

Maximum Speed

4,500 RPM

Additional Information

UPC

63452911656

Country of Origin

USA

Material Specification

2024-T351 Aluminum Bar

Finish

Black Anodized

Finish Specification

Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize

Manufacturer

Ruland Manufacturing

Temperature

Acetal Disk -10°F to 150°F
Acetal Disk -23°C to 65°C
Nylon Disk -10°F to 130°F
Nylon Disk -23°C to 54°C
PEEK Disk -10°F to 300°F
PEEK Disk -23°C to 148°C

Weight (lbs.)

0.0800

Product Notes

Note 1

Stainless steel hubs are available upon request.

Note 2

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 3

Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. Please consult technical support for more assistance.

Prop 65

WARNING This product can expose you to the chemical Ethylene Thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Dimensions

Outer Diameter OD

1.000 in, 25.4 mm

Performance Specifications

Rated Torque

10 in-lb, 1.13 Nm

Static Break Torque

140 in-lb, 15.9 Nm

Angular Misalignment

0.5°

Parallel Misalignment

0.008 in, 0.20 mm

Max Parallel Misalignment

0.100 in, 2.54 mm

Axial Motion

0.004 in, 0.10 mm

Torsional Stiffness

7.9 lb-in/Deg (0.90 Nm/Deg)

Maximum Speed

4,500 RPM

Additional Information

UPC

63452905996

Country of Origin

USA

Material Specification

Nylon 11

Finish Specification

Plain

Manufacturer

Ruland Manufacturing

Temperature

-10°F to 130°F
-23°C to 54°C

Weight (lbs.)

0.0060

Product Notes

Note 1

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 2

Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disks. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.

Prop 65

WARNING This product can expose you to the chemical Tetrafluoroethylene, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Dimensions

Bore B

9 mm

Bore Tolerance

+.03 mm / -.00 mm

B1 Shaft Penetration

11.9 mm

Keyway K

3 mm

Outer Diameter OD

25.4 mm

Length L

31.8 mm

Hub Width LH

11.9 mm

Fastening Hardware

Forged Clamp Screw

M3

Number of Screws

1 ea

Screw Material

Alloy Steel

Screw Finish

Black Oxide

Seating Torque

2.1 Nm

Hex Wrench Size

2.5 mm

Performance Specifications

Angular Misalignment

0.5°

Parallel Misalignment

0.008 in, 0.20 mm

Max Parallel Misalignment

0.100 in, 2.54 mm

Axial Motion

0.004 in, 0.10 mm

Maximum Speed

4,500 RPM

Additional Information

UPC

63452920827

Country of Origin

USA

Material Specification

2024-T351 Aluminum Bar

Finish

Black Anodized

Finish Specification

Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize

Manufacturer

Ruland Manufacturing

Temperature

Acetal Disk -10°F to 150°F
Acetal Disk -23°C to 65°C
Nylon Disk -10°F to 130°F
Nylon Disk -23°C to 54°C
PEEK Disk -10°F to 300°F
PEEK Disk -23°C to 148°C

Weight (lbs.)

0.0800

Product Notes

Note 1

Stainless steel hubs are available upon request.

Note 2

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 3

Torque ratings for the couplings are based on the physical limitations/failure point of the torque disks. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disks. Please consult technical support for more assistance.

Prop 65

WARNING This product can expose you to the chemical Ethylene Thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

PRODUCT SPECIFICATIONS

This Ruland oldham coupling bundle contains MOCC25-10-A, OD16/25-NL, and MOCC25-9-A. To make a complete assembly you must specify two hubs and one disk. All parts have an OD of 25.4mm and assembled length of 31.8mm. MOCC25-10-A is an aluminum clamp hub with a 10mm bore and 3mm keyway. OD16/25-NL is a nylon disk. MOCC25-9-A is an aluminum clamp hub with a 9mm bore and 3mm keyway. It operates with low bearing loads protecting sensitive system components such as bearings and has a balanced design for reduced vibration at speeds up to 6,000 RPM. Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. Hubs are manufactured in our Marlborough, MA factory under strict controls using proprietary processes from bar stock that is sourced exclusively from North American mills. All components in this bundle are RoHS2 and REACH compliant.

PRODUCT SPECIFICATIONS

Dimensions

Large Bore B1

10 mm

Small Bore B2

9 mm

Keyway K1

3 mm

Keyway K2

3 mm

Outer Diameter OD

1.000 in, 25.4 mm

Length L

31.8 mm

CERTIFICATIONS/STANDARDS
ISO 9001:2015

Certified

Conflict Minerals

Compliant

RoHS3

Compliant

REACH

Compliant

CUSTOMER REVIEWS

© 2019 Ruland Manufacturing Co., Inc. All rights reserved