MDSSK51-18-14-A

$218.89 ea
Quantity Price (USD)
1 $218.89 ea
10 $164.17 ea
25 $122.58 ea
50 $73.60 ea
100 Request Quote
Built to Order Lead Time: 0-2 Days
Ruland MDSSK51-18-14-A, 18mm x 14mm Single Disc Coupling, Aluminum, Set Screw Style With Keyway, 50.8mm OD, 46.1mm Length

PRODUCT SPECIFICATIONS

Ruland MDSSK51-18-14-A is a single disc coupling with 18mm x 14mm bores, 50.8mm OD, 46.1mm length, and 6mm x 5mm keyways. It is zero-backlash and has a balanced design for reduced vibration at high speeds. The single disc design is comprised of two anodized aluminum hubs and two sets of thin stainless steel disc springs which can accommodate angular misalignment and axial motion, however does not allow for any parallel misalignment. MDSSK51-18-14-A is lightweight and has low inertia making it well suited for applications with speeds up to 10,000 RPM. Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. Ruland manufactures MDSSK51-18-14-A to be torisionally rigid and an excellent fit for precise positioning stepper servo applications commonly found in semiconductor, solar, printing, machine tool, and test and measurement systems. It is machined from solid bar stock that is sourced exclusively from North American mills and RoHS2 and REACH compliant. MDSSK51-18-14-A is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

PRODUCT SPECIFICATIONS

Dimensions

Large Bore B1

18 mm

Small Bore B2

14 mm

B1 Shaft Penetration

22.2 mm

B2 Shaft Penetration

22.2 mm

Keyway K

6 mm

Keyway K2

5 mm

Bore Tolerance

+.03 mm / -.00 mm

Outer Diameter OD

50.8 mm

Length L

46.1 mm

Hub Width LH

20.6 mm

Fastening Hardware

Forged Set Screw

M6

Number of Screws

4 ea

Screw Material

Alloy Steel

Screw Finish

Black Oxide

Hex Wrench Size

3.0 mm

Seating Torque

7.2 Nm

Performance Specifications

Static Torque

39.6 Nm

Angular Misalignment

1.0°

Dynamic Torque Non-Reversing

19.80 Nm

Parallel Misalignment

0.00 mm

Dynamic Torque Reversing

9.90 Nm

Axial Motion

0.32 mm

Torsional Stiffness

98.0 Nm/Deg

Maximum Speed

10,000 RPM

Additional Information

Material Specification

Hubs: 2024-T351 Aluminum Bar, Disc Springs: Type 302 Stainless Steel

Temperature

-10°F to 200°F
-23°C to 93°C

Finish Specification

Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize

Manufacturer

Ruland Manufacturing

Country of Origin

USA

Weight (lbs.)

0.4400

UPC

63452918312

Product Notes

Note 1

Stainless steel hubs are available upon request.

Note 2

Torque ratings are at maximum misalignment.

Note 3

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 4

Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.

Prop 65

WARNING This product can expose you to chemicals including Ethylene Thiourea and Nickel (metallic), known to the State of California to cause cancer, and Ethylene Thiourea known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CERTIFICATIONS/STANDARDS
ISO 9001:2015

Certified

Conflict Minerals

Compliant

RoHS3

Compliant

REACH

Compliant

We found other products you might like!

CUSTOMER REVIEWS

© 2018 Ruland Manufacturing Co., Inc. All rights reserved