MCLH-130-F
$537.80
ea
Ruland MCLH-130-F, 130mm Heavy Duty Shaft Collar, Black Oxide Steel, One-Piece Clamp Style, 170mm OD, 32mm Width
PRODUCT SPECIFICATIONS
Ruland MCLH-130-F is a one-piece shaft collar with a 130mm bore, 170mm OD, and 32mm width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002"). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MCLH-130-F is stamped with the Ruland name and bore size for ease of identification. This heavy duty shaft collars have larger ODs and screws for higher holding power. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. MCLH-130-F is machined from solid bar stock to a fine burr free finish and sourced exclusively from North American mills. Ruland uses 1215 lead-free steel with a proprietary black oxide finish that produces a fine glossy finish while increasing holding power and resisting corrosion. It is RoHS2 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
| Dimension | |||
|---|---|---|---|
Bore B |
130 mm |
Bore Tolerance |
+.102 mm / -.000 mm |
Outer Diameter OD |
170 mm |
Clearance Diameter C MAX |
177.9 mm |
Width W |
32 mm |
Width Tolerance |
+.076 mm / -.254 mm |
| Fastening Hardware | |||
Forged Clamp Screw |
M12 x 40 |
Screw Material |
Alloy Steel |
Hex Wrench Size |
10.0 mm |
Screw Finish |
Black Oxide |
Seating Torque |
135 Nm |
Screw Location R |
76.50 mm |
Number of Screws |
1 ea |
||
| Additional Information | |||
Material Specification |
1215 Bar or A519 Hot Finished 1026 Carbon Steel |
Finish Specification |
Hot Process Black Oxide, Impregnated with Naphthenic Oil, Centrifugally Dried |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Temperature |
-40°F to 350°F |
Weight (lbs.) |
4.8600 |
UPC |
63452913333 |
||
| Product Notes | |||
Note 1 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Prop 65 |
|
WARNING This product can expose you to the chemical Ethylene Thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to 
