The store will not work correctly in the case when cookies are disabled.
Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.Thank you - the Ruland team
Mountable shaft collars with face holes are designed to mate directly with components such as sprockets, pulleys, and metallic plates. Ruland manufactures them with drilled holes for mounting flexibility or threaded holes for the most secure connection between the collar and mated component. They are offered in steel, aluminum, and 303 stainless steel in bore sizes ranging from 3/8” to 2” and 10mm to 50mm.
Clamp style universal joints improve over set screw style because they do not mar the shaft, offer infinite adjustability, and can be used on all shaft types. Ruland is the only North American supplier of clamp style universal joints and manufactures the clamp feature, bores, and keyways in our advanced manufacturing facility in Marlborough, MA USA. They are available in sizes from 1/4" to 1 1/4” in steel for high strength and stainless steel for corrosion resistance.
Ruland MCL-6E-TI is a one-piece shaft collar with a 0.3750" bore, 24mm OD, and 9mm width. It is an international series shaft collar that has metric hardware and dimensions with inch bores. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. MCL-6E-TI is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MCL-6E-TI is stamped with the Ruland name and bore size for ease of identification. Forged screws test beyond ANSI standards to ensure maximum holding power. MCL-6E-TI is manufactured from solid bar stock sourced from select North American mills and machined to a fine burr free finish. Ruland uses grade 6 titanium for lightweight and extreme temperature capabilities. MCL-6E-TI is RoHS3 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
PRODUCT SPECIFICATIONS
Dimension
Bore (B1)
Larger inner diameter. Should match nominal shaft diameter.
0.3750 in
Bore Tolerance
Variance in finished bore range before installation.
+0.0020 in / +0.0005 in
Outer Diameter (OD)
24 mm
Clearance Diameter (C) MAX
Minimum diameter required to avoid interference with hardware.
26.3 mm
Width (W)
9 mm
Width Tolerance
+0.076 mm / -0.254 mm
Recommended Shaft Tolerance
Acceptable variance in nominal shaft diameter before performance loss.
+0.0000 in / -0.0005 in
Fastening Hardware
Forged Clamp Screw
Inch or metric socket head cap screw size.
M3
Screw Material
Titanium
Hex Wrench Size
Wrench size that fits the screw head to tighten or loosen the screw.
2.5 mm
Screw Finish
Surface finish and treatments on supplied hardware.
Bright
Seating Torque
Torque required to install supplied hardware. Use torque wrench for accurate seating torque.
Temperature
Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...
-40°F to 500°F (-40°C to 260°C)
Weight (lbs)
0.031700
UPC
634529114834
Tariff Code
8483.60.8000
UNSPC
Code used to identify products to standardize nomenclature around the world.
31162811
Product Notes
Note 1
Performance ratings are for guidance only. The user must determine suitability for a particular application.
Note 2
This product is a non-inventory item and is built to order. Please contact us for an accurate lead time. Special orders for this item are non-cancellable and non-returnable.
Prop 65
Required for the US State of California only.