Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team

MCL-18E-F

$11.25
Quantity Price (USD)
1 $11.25
20 $10.23
60 $8.53
100 $7.67
250 Request Quote
In stock
Registered users receive a 5% discount

Ruland MCL-18E-F, 1 1/8" International Shaft Collar, Black Oxide Steel, One-Piece Clamp Style, 48mm OD, 15mm Width

Explore Similar Products

PRODUCT SPECIFICATIONS

Ruland MCL-18E-F is a one-piece shaft collar with a 1.1250" bore, 48mm OD, and 15mm width. It is an international series shaft collar that has metric hardware and dimensions with inch bores. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. MCL-18E-F is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. MCL-18E-F is stamped with the Ruland name and bore size for ease of identification. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. MCL-18E-F is manufactured from solid bar stock sourced from select North American mills and machined to a fine burr free finish. Ruland uses 1215 lead-free steel with a proprietary black oxide finish that produces a fine glossy finish while increasing holding power and resisting corrosion. MCL-18E-F is RoHS3 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

PRODUCT SPECIFICATIONS

Dimension

Bore (B1) Larger inner diameter. Should match nominal shaft diameter.

1.1250 in

Bore Tolerance Variance in finished bore range before installation.

+0.0020 in / +0.0005 in

Outer Diameter (OD)

48 mm

Clearance Diameter (C) MAX Minimum diameter required to avoid interference with hardware.

54.7 mm

Width (W)

15 mm

Width Tolerance

+0.076 mm / -0.254 mm

Recommended Shaft Tolerance Acceptable variance in nominal shaft diameter before performance loss.

+0.0000 in / -0.0005 in

Fastening Hardware

Forged Clamp Screw Inch or metric socket head cap screw size.

M6

Screw Material

Alloy Steel

Hex Wrench Size Wrench size that fits the screw head to tighten or loosen the screw.

5.0 mm

Screw Finish Surface finish and treatments on supplied hardware.

Black Oxide

Seating Torque Torque required to install supplied hardware. Use torque wrench for accurate seating torque.

16 Nm

Screw Location (R)

19.00 mm

Number of Screws

1 ea

Additional Information

Material Specification

1215 Carbon Steel Bar

Finish Specification Surface finish specifications.

Hot Process Black Oxide, Impregnated with Naphthenic Oil, Centrifugally Dried

Manufacturer

Ruland Manufacturing

Country of Origin

USA

Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...

-40°F to 350°F (-40°C to 176°C)

Weight (lbs)

0.285300

UPC

634529114001

Tariff Code

8483.60.8000

UNSPC Code used to identify products to standardize nomenclature around the world.

31162811

Product Notes

Note 1

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Prop 65 Required for the US State of California only.

WARNING This product can expose you to the chemical Ethylene Thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CERTIFICATIONS/STANDARDS
ISO 9001:2015

Certified

Conflict Minerals

Compliant

RoHS3

Compliant

REACH

Compliant

Installation Instructions

  1. Use the MCL-18E-F international series shaft collar as it is received.
  2. Wipe the bore clean.
  3. Apply a thin coat of light oil to the shaft.
  4. Place the collar onto the desired shaft location and tighten it using a 5.0 mm hex wrench until a slight resistance is felt.
  5. Wring collar into its final position and tighten the screw to the full recommended seating torque of 16 Nm using a 5.0 mm torque wrench.

CUSTOMER REVIEWS

MCL-18E-F
© 2024 Ruland Manufacturing Co., Inc. All rights reserved