Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team

JS36-16-A

$99.42
Quantity Price (USD)
1 $99.42
10 $90.38
25 $75.32
50 $67.78
100 Request Quote
In Production Lead Time: 0-2 Days
Ruland JS36-16-A, 1" Jaw Coupling Hub, Aluminum, Set Screw Style, 2.250" OD, 1.130" Length

Explore Similar Products

PRODUCT SPECIFICATIONS

Ruland JS36-16-A is a set screw zero-backlash jaw coupling hub with a 1.0000" bore, 2.250" OD, and 1.130" length. It is a component in a three-piece design consisiting of two aluminum hubs and an elastomeric insert called the spider creating a lightweight low inertia coupling capable of speeds up to 8,000 RPM. This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores. Spiders are available in three durometers allowing the user to tailor coupling performance to their application. Ruland jaw couplings have a balanced design for reduced vibration at high speeds. Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. JS36-16-A is machined from bar stock that is sourced exclusively from North American mills and is RoHS3 and REACH compliant. It is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

PRODUCT SPECIFICATIONS

Dimensions

Bore (B1) Larger inner diameter. Should match nominal shaft diameter.

1.0000 in

B1 Max Shaft Penetration The maximum depth the shaft can penetrate into Bore B1.

1.130 in

Outer Diameter (OD)

2.250 in (57.2 mm)

Bore Tolerance Variance in finished bore range before installation.

+0.001 in / -0.000 in

Hub Width (LH)

1.130 in

Length (L)

3.150 in (80.0 mm)

Recommended Shaft Tolerance Acceptable variance in nominal shaft diameter before performance loss.

+0.0000 in / -0.0005 in

Fastening Hardware

Forged Set Screw Inch or metric socket head set screw size.

M8

Number of Screws

2 ea 90° apart

Screw Material

Alloy Steel

Screw Finish Surface finish and treatments on supplied hardware.

Black Oxide

Hex Wrench Size Wrench size that fits the screw head to tighten or loosen the screw.

4.0 mm

Seating Torque Torque required to install supplied hardware. Use torque wrench for accurate seating torque.

17 Nm

Performance Specifications

Torque Specifications Torque is dependent on the insert selected. Please see "Recommended Inserts" to select the correct insert for your application.

Torque ratings vary with insert selection

Misalignment Misalignment is dependent on the insert selected. Please see "Recommended Inserts" to select the correct insert for your application.

Misalignment ratings vary with insert selection

Maximum Speed

8,000 RPM

Moment of Inertia

0.32974 lb-in2

Full Bearing Support Required? Full bearing support is a bearing in close proximity to both sides of the coupling to prevent axial loads that could result in rapid coupling failure.

Yes

Recommended Inserts Any of these inserts will match this coupling hub.

JD36/57-98R, JD36/57-92Y

Zero-Backlash? Zero-backlash ensures there is no loss of motion during operation.

Yes

Balanced Design The balanced design allows for reduced vibration at high RPMs.

Yes

Fail Safe? If the spider fails tenons will interlock preventing the loss of power transmission.

Yes

Additional Information

Weight (lbs)

0.421000

Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...

-10°F to 180°F (-23°C to 82°C)

Material Specification

2024-T351 Aluminum Bar

Finish

Bright

Finish Specification Surface finish specifications.

Bright, No Plating

Manufacturer

Ruland Manufacturing

Recommended Gap Between Hubs The recommended installation gap between the two hubs.

0.050 in (1.25 mm)

Country of Origin

USA

UPC

634529068854

UNSPC Code used to identify products to standardize nomenclature around the world.

31163011

Tariff Code

8483.60.8000

Product Notes

Note 1

Stainless steel hubs are available upon request.

Note 2

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 3

Torque ratings for the couplings are based on the physical limitations/failure point of the spiders. Under normal/typical conditions the hubs are capable of holding up to the nominal torque of the spiders. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the nominal torque of the spiders. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.

Prop 65 Required for the US State of California only.

WARNING This product can expose you to the chemical Ethylene Thiourea, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CERTIFICATIONS/STANDARDS
ISO 9001:2015

Certified

Conflict Minerals

Compliant

RoHS3

Compliant

REACH

Compliant

Installation Instructions

  1. Align the bores of the JS36-16-A jaw coupling hubs on the shafts that are to be joined and determine if the misalignment parameters are within the limits of the coupling. (See spider for misalignment parameters.)
  2. Fully tighten the M8 screw(s) on the first hub to the recommended seating torque of 17 Nm using a 4.0 mm hex torque wrench.
  3. Insert a spider into the jaws of one hub until the raised points contact the base of the hub.
  4. Insert the jaws of the second hub into the spider openings until the raised points contact the base of the second hub. Some force will be required to insert the second hub. This is normal.
  5. Assure that a gap is maintained between the two hubs so there is no metal to metal contact. Fully tighten the screw(s) on the second hub to the recommended seating torque.

CUSTOMER REVIEWS

JS36-16-A
© 2024 Ruland Manufacturing Co., Inc. All rights reserved