JS10-2-A JD10/15-98R MJS15-6-A

  • JS10-2-A
    Quantity Price (USD)
    1 $18.41 ea
    20 $11.05 ea
    50 $9.21 ea
    100 $8.28 ea
    In Stock
  • JD10/15-98R
    Quantity Price (USD)
    1 $10.27 ea
    20 $6.16 ea
    50 $5.14 ea
    100 $4.62 ea
    In Stock
  • MJS15-6-A
    Quantity Price (USD)
    1 $18.41 ea
    20 $11.05 ea
    50 $9.21 ea
    100 $8.28 ea
    In Stock
In stock
Ruland JS10-2-A JD10/15-98R MJS15-6-A, 1/8" x 6mm Jaw Coupling Bundle, Aluminum, Set Screw Style Hubs, 0.590" (15.0mm) OD, 0.860" (21.8mm) Length

Dimensions

Bore B

0.125 in

B1 Shaft Penetration

0.300 in

Outer Diameter OD

0.590 in

Bore Tolerance

+.001 in / -.000 in

Hub Width LH

0.300 in

Length L

0.860 in

Fastening Hardware

Forged Set Screw

M3

Number of Screws

1 ea

Screw Material

Alloy Steel

Screw Finish

Black Oxide

Hex Wrench Size

1.5 mm

Seating Torque

0.92 Nm

Performance Specifications

Maximum Speed

8,000 RPM

Additional Information

Weight (lbs.)

0.0090

Temperature

-10°F to 180°F
-23°C to 82°C

Material Specification

2024-T351 Aluminum Bar

Finish

Bright

Finish Specification

Bright

Manufacturer

Ruland Manufacturing

UPC

63452906858

Country of Origin

USA

Product Notes

Note 1

Stainless steel hubs are available upon request.

Note 2

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 3

Torque ratings for the couplings are based on the physical limitations/failure point of the spiders. Under normal/typical conditions the hubs are capable of holding up to the nominal torque of the spiders. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the nominal torque of the spiders. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.

Dimensions

Outer Diameter OD

0.590 in / 15.0 mm

Performance Specifications

Nominal Torque

8 in-lb, 0.9 Nm

Angular Misalignment

0.8°

Peak Torque

16 in-lb, 1.8 Nm

Parallel Misalignment

0.002 in, 0.05 mm

Torsional Stiffness

0.121 Deg/in-lb, 1.068 Deg/Nm

Axial Motion

0.02 in, 0.51 mm

Maximum Speed

8,000 RPM

Additional Information

Weight (lbs.)

0.0010

Temperature

-10°F to 180°F
-23°C to 82°C

Material Specification

Polyurethane 98 Shore A RED

Finish Specification

Plain

Manufacturer

Ruland Manufacturing

UPC

63452906886

Country of Origin

USA

Product Notes

Note 1

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 2

Torque ratings for the couplings are based on the physical limitations/failure point of the spiders. Under normal/typical conditions the hubs are capable of holding up to the nominal torque of the spiders. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the nominal torque of the spiders. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.

Dimensions

Bore B

6 mm

B1 Shaft Penetration

7.6 mm

Outer Diameter OD

15.0 mm

Bore Tolerance

+.03 mm / -.00 mm

Hub Width LH

7.6 mm

Length L

21.8 mm

Fastening Hardware

Forged Set Screw

M3

Number of Screws

1 ea

Screw Material

Alloy Steel

Screw Finish

Black Oxide

Hex Wrench Size

1.5 mm

Seating Torque

0.92 Nm

Performance Specifications

Maximum Speed

8,000 RPM

Additional Information

Weight (lbs.)

0.0090

Temperature

-10°F to 180°F
-23°C to 82°C

Material Specification

2024-T351 Aluminum Bar

Finish

Bright

Finish Specification

Bright

Manufacturer

Ruland Manufacturing

UPC

63452906800

Country of Origin

USA

Product Notes

Note 1

Stainless steel hubs are available upon request.

Note 2

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 3

Torque ratings for the couplings are based on the physical limitations/failure point of the spiders. Under normal/typical conditions the hubs are capable of holding up to the nominal torque of the spiders. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the nominal torque of the spiders. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.

PRODUCT SPECIFICATIONS

This Ruland jaw coupling bundle contains JS10-2-A, JD10/15-98R, and MJS15-6-A. To make a complete assembly you must specify two hubs and one spider. All parts have an OD of 0.590" (15.0mm) and assembled length of 0.860" (21.8mm). JS10-2-A is a set screw hub with a 1/8" bore. JD10/15-98R is a 98 Shore A RED spider. MJS15-6-A is a set screw hub with a 6mm bore. The dampening characteristics of this zero-backlash jaw coupling reduce settling time and shock loads making it well suited for systems that have agressive acceleration/deceleration profiles. Ruland jaw couplings have a balanced design for reduced vibration at high speeds. Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. Hubs are manufactured in our Marlborough, MA factory under strict controls using proprietary processes from bar stock that is sourced exclusively from North American mills. All components in this bundle are RoHS2 and REACH compliant.

PRODUCT SPECIFICATIONS

Dimensions

Large Bore B1

6 mm

Small Bore B2

0.125 in

Outer Diameter OD

0.590 in / 15.0 mm

Length L

0.860 in, 21.8 mm

CERTIFICATIONS/STANDARDS
ISO 9001:2015

Certified

Conflict Minerals

Compliant

RoHS3

Compliant

REACH

Compliant

CUSTOMER REVIEWS

© 2018 Ruland Manufacturing Co., Inc. All rights reserved