Due to Microsoft's discontinuation of updates, including security, certain functionality such as checkout and CAD may not work for you. We recommend using Google Chrome, Microsoft Edge, Firefox, or Safari to ensure full functionality.
Thank you - the Ruland team

FSMR38-15-11-SS

$297.77
Quantity Price (USD)
1 $297.77
10 $270.70
25 $225.59
50 $203.03
100 Request Quote
In Production Lead Time: 0-2 Days
Ruland FSMR38-15-11-SS, 15mm x 11mm Six Beam Coupling, Stainless Steel, Set Screw Style, 38.1mm OD, 57.2mm Length

Explore Similar Products

PRODUCT SPECIFICATIONS

Ruland FSMR38-15-11-SS is a set screw style six beam coupling with 15mm x 11mm bores, 38.1mm OD, and 57.2mm length. It is machined from a single piece of material and features two sets of three spiral cuts. This gives it higher torque capacity, lower windup, and larger body sizes than single or four beam couplings and allows for use in light duty power transmission applications such as coupling a servo motor to a lead screw. FSMR38-15-11-SS is zero-backlash and has a balanced design for reduced vibration at high speeds of up to 6,000 RPM. All hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. FSMR38-15-11-SS is made from 303 stainless steel for increased torque capacity. It is machined from bar stock that is sourced exclusively from North American mills and RoHS3 and REACH compliant. FSMR38-15-11-SS is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

PRODUCT SPECIFICATIONS

Dimensions

Bore (B1) Larger inner diameter. Should match nominal shaft diameter.

15 mm

Small Bore (B2) Smaller inner diameter. Should match nominal shaft diameter.

11 mm

B1 Max Shaft Penetration The maximum depth the shaft can penetrate into Bore B1.

27.3 mm

B2 Max Shaft Penetration The maximum depth the shaft can penetrate into Bore B2.

27.3 mm

Outer Diameter (OD)

38.1 mm

Bore Tolerance Variance in finished bore range before installation.

+0.025 mm / -0.000 mm

Length (L)

57.2 mm

Recommended Shaft Tolerance Acceptable variance in nominal shaft diameter before performance loss.

+0.000 mm / -0.013 mm

Fastening Hardware

Forged Set Screw Inch or metric socket head set screw size.

M6

Screw Material

Alloy Steel

Hex Wrench Size Wrench size that fits the screw head to tighten or loosen the screw.

3.0 mm

Screw Finish Surface finish and treatments on supplied hardware.

Black Oxide

Seating Torque Torque required to install supplied hardware. Use torque wrench for accurate seating torque.

7.2 Nm

Number of Screws

4 ea

Performance Specifications

Dynamic Torque Reversing Max torque when coupling reverses direction without stopping.

4.96 Nm

Angular Misalignment Max angle of the shaft axes relative to each other.

3.0°

Dynamic Torque Non-Reversing Max torque for the coupling during quick changes in acceleration or deceleration.

9.91 Nm

Parallel Misalignment Shafts are parallel to each other, but not in-line with each other. They are offset.

0.76 mm

Static Torque Unidirectional constant max torque.

19.82 Nm

Axial Motion The amount shafts can move closer to or away from each other. This is meant for thermal expansion of the shafts. No axial force can be placed on the coupling.

0.38 mm

Torsional Stiffness Measures the rigidity of the coupling. The more rigid the coupling, the less windup it will have.

0.27 Deg/Nm

Moment of Inertia

83.407 x10-6 kg-m2

Maximum Speed

6,000 RPM

Full Bearing Support Required? Full bearing support is a bearing in close proximity to both sides of the coupling to prevent axial loads that could result in rapid coupling failure.

Yes

Zero-Backlash? Zero-backlash ensures there is no loss of motion during operation.

Yes

Recommended Installation Tools

Torque Wrench This torque wrench and bit combo is recommended to ensure proper installation. A torque wrench prevents the screw from being over torqued which can lead to product failure.

TW:BT-4C-3/8-64

Recommended Hex Key This hex key set has the appropriate hex key for product installation. Trained and experienced assemblers can use a hex key in place of a torque wrench.

Metric Hex Keys

Additional Information

Material Specification

Type 303 Austenitic, Non-Magnetic Bar

Temperature Minimum and maximum operating temperature. Operating temperature includes ambient temperature plus or minus factors such as system heat generated during operation, washdown, vacuum, etc...

-40°F to 350°F (-40°C to 176°C)

Finish Specification Surface finish specifications.

Bright, No Plating

Manufacturer

Ruland Manufacturing

Country of Origin

USA

Weight (lbs)

0.866800

UPC

634529046760

Tariff Code

8483.60.8000

UNSPC Code used to identify products to standardize nomenclature around the world.

31163003

Product Notes

Note 1

Torque ratings are at maximum misalignment.

Note 2

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 3

Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.

Prop 65 Required for the US State of California only.

WARNING This product can expose you to chemicals including Ethylene Thiourea and Nickel (metallic), known to the State of California to cause cancer, and Ethylene Thiourea known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CERTIFICATIONS/STANDARDS
ISO 9001:2015

Certified

Conflict Minerals

Compliant

RoHS3

Compliant

REACH

Compliant

Installation Instructions

  1. Align the bores of the FSMR38-15-11-SS six beam coupling on the shafts that are to be joined and determine if the misalignment parameters are within the limits of the coupling. (Angular Misialignment: 3°, Parallel Misalignment: 0.76 mm, Axial Motion: 0.38 mm)
  2. Fully tighten the M6 screws on one hub to the recommended seating torque of 7.2 Nm using a 3.0 mm hex torque wrench.
  3. Before tightening the screws on the second hub, rotate the coupling by hand to allow it to reach its free length.
  4. Tighten the screws on the second hub to the recommended seating torque. Make sure the coupling remains axially relaxed and the misalignment angle remains centered along the length of the coupling.
  5. The shafts may extend into the relieved portion of the bore as long as it does not exceed the shaft penetration length of 27.3 mm.

CUSTOMER REVIEWS

FSMR38-15-11-SS
© 2024 Ruland Manufacturing Co., Inc. All rights reserved