DSDK32-7/8"-12MM-A

$261.68 ea
Quantity Price (USD)
1 $261.68 ea
10 $196.26 ea
25 $146.54 ea
50 $87.99 ea
100 Request Quote
Built to Order Lead Time: 0-2 Days
Ruland DSDK32-7/8"-12MM-A, 7/8" x 12mm Double Disc Coupling, Aluminum, Set Screw Style With Keyway, 2.000" (50.8mm) OD, 2.519" (64.0mm) Length

PRODUCT SPECIFICATIONS

Ruland DSDK32-7/8"-12MM-A is a double disc coupling with 7/8" x 12mm bores, 2.000" (50.8mm) OD, 2.519" (64.0mm) length, and 3/16" x 4mm keyways. It is zero-backlash and has a balanced design for reduced vibration at high speeds. The double disc design is comprised of two anodized aluminum hubs, two sets of thin stainless steel disc springs, and a center spacer allowing each disc to bend individually and accommodate all types of misalignment. DSDK32-7/8"-12MM-A is lightweight and has low inertia making it well suited for applications with speeds up to 10,000 RPM. Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. Ruland manufactures DSDK32-7/8"-12MM-A to be torisionally rigid and an excellent fit for precise positioning stepper servo applications commonly found in semiconductor, solar, printing, machine tool, and test and measurement systems. It is machined from solid bar stock that is sourced exclusively from North American mills and RoHS2 and REACH compliant. DSDK32-7/8"-12MM-A is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

PRODUCT SPECIFICATIONS

Dimensions

Large Bore B1

0.875 in

Small Bore B2

12 mm

B1 Shaft Penetration

1.192 in, 30.3 mm

B2 Shaft Penetration

1.192 in, 30.3 mm

Keyway K

3/16 in

Keyway K2

4 mm

Bore Tolerance

+.001 in / -.000 , +.03 mm / -.00 mm

Outer Diameter OD

2.000 in / 50.8 mm

Length L

2.519 in, 64.0 mm

Hub Width LH

0.810 in, 20.6 mm

Fastening Hardware

Forged Set Screw

M6

Number of Screws

4 ea

Screw Material

Alloy Steel

Screw Finish

Black Oxide

Hex Wrench Size

3.0 mm

Seating Torque

7.2 Nm

Performance Specifications

Static Torque

350 lb-in, 39.6 Nm

Angular Misalignment

2.0°

Dynamic Torque Non-Reversing

175 lb-in, 19.80 Nm

Parallel Misalignment

0.012 in, 0.30 mm

Dynamic Torque Reversing

87.5 lb-in, 9.90 Nm

Axial Motion

0.025 in, 0.64 mm

Torsional Stiffness

595 lb-in/Deg, 67.2 Nm/Deg

Maximum Speed

10,000 RPM

Additional Information

Material Specification

Hubs and Center Spacer: 2024-T351 Aluminum Bar
Disc Springs: Type 302 Stainless Steel

Temperature

-10°F to 200°F
-23°C to 93°C

Finish Specification

Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize

Manufacturer

Ruland Manufacturing

Country of Origin

USA

Weight (lbs.)

0.4400

UPC

63452918907

Product Notes

Note 1

Stainless steel hubs are available upon request.

Note 2

Torque ratings are at maximum misalignment.

Note 3

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 4

Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.

Prop 65

WARNING This product can expose you to chemicals including Ethylene Thiourea and Nickel (metallic), known to the State of California to cause cancer, and Ethylene Thiourea known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

CERTIFICATIONS/STANDARDS
ISO 9001:2015

Certified

Conflict Minerals

Compliant

RoHS3

Compliant

REACH

Compliant

We found other products you might like!

CUSTOMER REVIEWS

© 2018 Ruland Manufacturing Co., Inc. All rights reserved