$155.62 ea
Quantity Price (USD)
1 $155.62 ea
10 $116.72 ea
25 $87.15 ea
50 $52.33 ea
100 Request Quote
Built to Order Lead Time: 0-2 Days
Ruland DSD16-10MM-5/16"-A, 10mm x 5/16" Double Disc Coupling, Aluminum, Set Screw Style, 1.000" (25.4mm) OD, 1.374" (34.9mm) Length


Ruland DSD16-10MM-5/16"-A is a double disc coupling with 10mm x 5/16" bores, 1.000" (25.4mm) OD, and 1.374" (34.9mm) length. It is zero-backlash and has a balanced design for reduced vibration at high speeds. The double disc design is comprised of two anodized aluminum hubs, two sets of thin stainless steel disc springs, and a center spacer allowing each disc to bend individually and accommodate all types of misalignment. DSD16-10MM-5/16"-A is lightweight and has low inertia making it well suited for applications with speeds up to 10,000 RPM. Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities. Ruland manufactures DSD16-10MM-5/16"-A to be torisionally rigid and an excellent fit for precise positioning stepper servo applications commonly found in semiconductor, solar, printing, machine tool, and test and measurement systems. It is machined from solid bar stock that is sourced exclusively from North American mills and RoHS2 and REACH compliant. DSD16-10MM-5/16"-A is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.



Large Bore B1

10 mm

Small Bore B2

0.313 in

B1 Shaft Penetration

0.654 in, 16.6 mm

B2 Shaft Penetration

0.654 in, 16.6 mm

Outer Diameter OD

1.000 in, 25.4 mm

Bore Tolerance

+.001 in / -.000 , +.03 mm / -.00 mm

Length L

1.374 in / 34.9 mm

Hub Width LH

0.467 in, 11.8 mm

Fastening Hardware

Forged Set Screw


Screw Material

Alloy Steel

Hex Wrench Size

2.0 mm

Screw Finish

Black Oxide

Seating Torque

2.2 Nm

Number of Screws

4 ea

Performance Specifications

Static Torque

50 lb-in, 5.6 Nm

Angular Misalignment


Dynamic Torque Non-Reversing

25 lb-in, 2.80 Nm

Parallel Misalignment

0.006 in, 0.15 mm

Dynamic Torque Reversing

12.5 lb-in, 1.40 Nm

Axial Motion

0.012 in, 0.30 mm

Torsional Stiffness

61 lb-in/Deg, 6.9 Nm/Deg

Maximum Speed

10,000 RPM

Additional Information

Material Specification

Hubs and Center Spacer: 2024-T351 Aluminum Bar
Disc Springs: Type 302 Stainless Steel


-10°F to 200°F
-23°C to 93°C

Finish Specification

Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize


Ruland Manufacturing

Country of Origin


Weight (lbs.)




Product Notes

Note 1

Stainless steel hubs are available upon request.

Note 2

Torque ratings are at maximum misalignment.

Note 3

Performance ratings are for guidance only. The user must determine suitability for a particular application.

Note 4

Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.

Prop 65

WARNING This product can expose you to chemicals including Ethylene Thiourea and Nickel (metallic), known to the State of California to cause cancer, and Ethylene Thiourea known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

ISO 9001:2015


Conflict Minerals






We found other products you might like!


© 2019 Ruland Manufacturing Co., Inc. All rights reserved